DANGER! Lethal
Potentials Present
THIS
MODULE CONTAINS DANGEROUS, HIGH VOLTAGE POTENTIALS. USE CAUTION.
DO NOT TOUCH ANY PART OF THE MODULE WHEN IT IS WORKING.
Tips:
1. Standard 0.1"(2.54mm) pins and SMD half holes, easy to be used, can use bread board or DuPont-Wires
etc.
2. Please control the input current <=800mA for the low heat working state;
3. Module contains over current
protection+soft boot-up. When over heat, the module will turn off, you need to re-power on
to reset the module;
4.We recommend working under 5V only,no over 6V.
5. More stable HV output, even for the heavy loader, the max output voltage only get a little bit drop;
6. If one module's power is not suited for your app,use two or more modules for driving the separated NIXIE tube(s) group,etc.;
7. Do not connect the modules' outputs in "Parallel Connection"!!!Do not Connect The +HV putput pins with AC1/AC2 pins, do not short HV And AC1/AC2 pins!!!
Description:
HV5WAC-E
is a newly designed high voltage module, it works under 5V USB
power,
with ~170V DC output via +HV pin and HV AC output via AC1+AC2 pins,(especially designed for driving the NIXIE tubes.
The max power output is enough for lighting up 8PCS IN-14 NIXIE tubes(Or 4PCS IN-18 with all segment "8" been light up) +
4PCS NE-2 neon bulbs. Low EMI and with No audible noise.
It contains an ENABLE pin to turn the module on/off, and can be
controlled by an regular logic signal, like a MCU's GPIO PIN(3V3 or 5V MCUs are all fine).
Pictures/Video(s) of the module
(For reference only):
Specifications(For reference only):
Module Size : 37mm(L)*11mm(W)*~6.4mm(H);
Module Pins : Half holes in 0.1"(2.54mm) std. gaps, output part in 0.15#;
PCB Color : Black;
Freq: ~85kHz;
Pin Functions
ID |
Name |
Description |
0 |
Vcc/+5V |
Input supply voltage, 4.5V to 12V.(Recommend 5V only, no over 6V) |
1 |
EN-HV |
Enable pin
for turning the +HV output ON/OFF |
2 |
EN-AC |
Enable pin for turing the AC1+AC2 output ON/OFF(The EN-HV pinmust be on first) |
3 |
GND |
Ground |
4,6 |
AC1+AC2 |
High voltage AC output ;~170V (+-10%) |
5 |
HV |
High voltage DC output. +170V(+-5%) |
For 24*7 continually working condition, we recommend you control the input current less than 800mA when under 5V in, it keeps this module working under the low heat condition.
And this module is also suite for driving 6 tubes IN-18 clock, you just need to use two modules for driving it. Each module can drive 3PCS IN-18 tubes + 2PCS NE-2 neon bulbs (as dots) with no problem.
Typical Usage:
For driving NIXIE Tubes;
When under heavy loader,eg:output over 18mA,under 24*7 condition,the Max temperature of the transformer is about: Room temperature+20℃;Other parts get almost no heat.
Note:
We may not be able to provide extra
technology support!
We may will change the Outlook/Circuit/PCB/Components etc. without notification!
It's DIY stuff,sometimes may need 3~5 working days for assembling and heat testing!
Contains:
1PCS HV5WAC-E module only, ready to go.(without any tubes, without
power adapter, without wires;)
Payment methods:
We ONLY accept PayPal on eBay selling, other payment is
not acceptable.
Please PAY within 7 days, or we'll re-selling the item.
Shipping:
We ship to American via ePacket Delivery with tracking number;
We ship to Other countries/locations via International Economy Package with tracking number;
For shipping to The United Kingdom or
Canada or Australia or Russian Federation, we strongly recommend you update to the
EUB(express);
Price for updating to the EUB(express):
For shipping to The United Kingdom or Australia: +5.99usd;
For shipping to Russian Federation: +3.99usd;
China Post Office tracking website:
Shipping time:
10-20 working days for ePacket Delivery to the U.S.A.(normally you will receive it in about two weeks),
depends on the destination location; For other far locations may need more
days.
Please note that International
Economy Package can ship to the World wild with low price, but the transport speed is very unstable, mail delay is
very normal, shipping to far locations may cost
over 30 days, sometimes the cargoes will be stacked in the airport for over one month(especially in the special meeting
time, it happened before).
Please understand that we can't control
the mail speed. If the mail delayed, please be patient.
If you want to save your time, add extra money for
updating to the EMS.
We ship to your PAYPAL Verified Address only;
Any import tax or charges should be paid by the
buyer.