eBay

INCLUDES:

4x TPT-D250X Pro Audio 1" Exit Phenolic Compression Driver

4x HL11-25 Horn 1" Exit Screw-On horn

1x TPT-500 2 Ohms Timpano Compact 1 Channel Car Audio Amplifier

FEATURES:

TPT-D250X + TPT-HL11-25

The Timpano TPT-D250X, Pro Audio 1″ Exit Phenolic Compression Driver 250 Watts 8 Ohm Light weight and offers unsurpassed vocal and midrange reproduction.
The TPT-D250X horn driver offers outstanding performance for midrange reproduction in professional PA systems, stage monitors, studio monitors, and stage speaker enclosures where additional midrange support is required. Its 1-3/8″-18 TPI threaded exit is compatible with many popular screw-on horns, such as TPT-HL11-25.

A phenolic diaphragm and 2″ voice coil provide natural low frequency response and durability
More output with less power, 107 dB efficiency for high output capability with PRO Audio loudspeakers
With a frequency response of 400 to 8,000 Hz, this midrange driver is designed for vocal reinforcement in 3-way car audio systems

With a nearly indestructible phenolic diaphragm and a 2 inch voice coil, this technology delivers natural vocal midrange response at an efficient of 107 dB sensitivity

Specs:
250 Watts Max Power
75 Watts RMS Power
Impedance: 8 Ohm
Sensitivity: 107 dB
Frequency Response: 400 – 8,000Hz
Voice Coil: 2”
Phenolic Diaphragm with a 2″ voice coil
Recommended High Pass Filter:
700 Hz under 125 Watts of Amplifier RMS Power with 18dB Slope
600 Hz under 75 Watts of Amplifier RMS Power with 12dB Slope
Sizing:
Overall Size: 4.41″ x 4.41″ x 2.99″ Height
Weight: 3.11 Lbs

Original Manufacturer Replacement Diaphragms that Maintain Peak Performance are available: TPT-RPD250X

TPT-HL11-25 Slim Compact Horn

-1″ Exit Screw-On horn
-Size: 4.52″ x 4.52″ x 2.95″
-Compact size
-60° x 60° Nominal Coverage

TPT-500 2 Ohm

Timpano Compact 1 Channel TPT500 2 Ohms Car Audio Amplifier – 1x 500 Watts at 2 Ohms – Mini Stereo 12 volts Full Range Class D Amp

Small Footprint Technology!

Timpano amplifiers raises power amplification to a new standard of quality and usability. The new line delivers the most innovative and powerful Brazilian technology in compact full range amplifiers on the market. Loaded with features, it provides an unsurpassed efficiency rate of 80-90% in a compact Class D full range amplifier.

COMPACT DESIGN: Digital class D Brazilian technology allows this amplifier to have a small footprint by integrating a high-speed mosfet power supply with top of line transistors to ensure performance in a small heat sink without compromising performance. Dimensions: 3.93″ depth x 5.02″ width x 2″ height
POWER: This amplifier is designed to run your system with the power it needs to perform! 500 Watts maximum dynamic RMS power output on one channel. Its high efficiency rate of 85% provides more power with less battery consumption.
HIGH LEVEL INPUTS with SIGNAL AUTO TURN ON: Attaches directly to systems using speaker-level inputs with signal auto turn-on to eliminate remote turn-on wiring
TECHNOLOGY: A smart electronic 2-way protection circuit protects the amp if it gets too hot or if speakers fail causing a short! Focusing in sound quality, a full range response of 10 to 22,000Hz was used to give the best sound reproduction on this tiny amplifier.
FEATURES: Heavy Duty 10 Gauge power and speaker wire Inputs. Built-in crossover filters for easy tuning! Built-in variable crossover filters: HPF ( 10 – 700Hz ) and LPF ( 60 – 22 KHz ). It also includes Variable Gain Control. Level controls are not for adjusting volume. They adjust the amount of signal that is coming into the amplifier from your signal source.

Additional Information:
Number of Channels: 1
Max Dynamic Output: 500 Watts RMS 2 Ohm
380 Watts RMS Power at 2 Ohm 12.6 Volts
150 Watts RMS Power at 4 Ohm 12.6 Volts
Supply Voltage: 10 ~ 15V
Frequency Response: 10Hz ~ 22KHz
LPF – Crossover Low Pass: 60Hz to 22,000 Hz
HPF – Crossover High Pass: 10Hz to 700 Hz
Signal to Noise: > 90 dB
Harmonic Distortion: < 0.9 % THD
Input Impedance: 10K Ohm with RCA and 38K Ohm with Wires
Impedance Output: 2 Ohm
Consumption with Signal Musical: 1A ~ 18A
Dimensions (L x W x H): 3.93” x 5.02” x 2”
Weight: 1.12 Lbs

Before Installing:

You must follow the instructions for the product’s installation and connections to guarantee optimal performance. If you have any questions, get in touch with us. Before using the amplifier, always follow these guidelines:

• Make sure the amplifier is switched off before adding or removing any connections. This prevents possible damage to the equipment connected to the amplifier;
• Keep all cables as far away as possible from the ignition cables, electronic injection modules and starter switch since they may cause noise interference;
• Always use 100% Cooper cables and good quality connectors. This guarantees the sound’s quality and fidelity;
• To avoid damaging the cables, make sure that they do not touch sharp metal edges. Important: Use a fuse 12 inches away from the battery as a safety precaution