The PRV Pro Audio Loudspeaker, 6MB200-4 v2 midbass woofer, offers outstanding durability and a smooth punch of mid bass for small enclosures. This woofer is perfect for home Hi-Fi installs, including bookshelf, satellite, surround sound speakers and even home studio monitors.
The 6MB200-4 v2 now has more extended midrange response, up to 6.5 kHz compared to its previous model, and is a perfect option for mid range driver replacements in three-way cabinets. The magnet and motor assembly are attached to a sturdy reinforced steel frame, ensuring a solid support structure and long lasting play in most any environment. Its light weight of only 3.3 Lbs helps to keep your enclosures light, making it perfect for car audio applications.
Highlights
- Nominal Impedance: 4 Ohms
- Rated AES Power Handling (RMS): 100 Watts
- Program Power: 200 Watts
- Sensitivity (1W/1m): 93.5 dB
- Voice Coil Diameter: 1.5″
GENERAL SPECIFICATIONS
| Nominal Diameter | 6″ (152 mm) |
| Nominal impedance | 4 Ohms |
| Rated AES Power Handling (RMS) | 100 Watts |
| Program Power | 200 Watts |
| Sensitivity 2.00V at 1m | 93.5 dB |
| Recommended Hi Pass Crossover* *For Full Power Handling | 125 Hz** **12db Per Octave Crossover |
| Frequency Response at -10dB | 125 – 6,500 Hz |
| Voice Coil Diameter | 1.5″ (38 mm) |
| Voice Coil Wire | Copper |
| Voice Coil Winding Depth | 12.5 mm |
| Former Material | Kapton |
| Magnetic Gap Depth | 5.8 mm |
| Frame Material | Stamped Steel |
THIELE-SMALL PARAMETERS
| Equivalent Volume | Vas | 3.97 l |
| Excursion (mathematical)*** | Xmax | 4.80 mm |
| Free Air Resonance | Fs | 123.79 Hz |
| Mechanical Factor | Qms | 20.84 |
| Electrical Factor | Qes | 1.02 |
| Total Factor | Qts | 0.97 |
| Cone Area | Sd | 154 cm² |
| Mechanical Mass | Mms | 11.89 g |
| Bl Factor | Bl | 5.79 Tm |
| Dc Resistance | Re | 3.7 Ohms |
| Inductance | Le | 0.18 mH at 1 kHz |
| Mechanical Mass Without Air | Mmd | 10.92 g |
| Mechanical Compliance | Cms | 0.139 mm/N |
EXTRA INFO
| Overall Diameter | 6.53″ (166 mm) |
| Front Mount Baffle Cutout | 5.63″ (143 mm) |
| Mounting Depth | 2.6″ (66 mm) |
| Overall Depth | 2.91″ (74 mm) |
| Net Weight | 3.30 Lbs (1.50 kg) |
| Shipping Weight | 3.62 Lbs (1.64 kg) |
| Carton Dimensions W x L x H | 7.17″ x 7.17″x 4.13″ (182 x 182 x 105 mm) |
Add crystal clear sparkle to any speaker with TW350Ti-4 SLIM, a titanium bullet super tweeter from PRV Audio! Not only does this driver look as good as it sounds, but with an ultra shallow design, this tweeter is easy to mount anywhere!!
The PRV Audio TW350Ti-4 SLIM Super Bullet Tweeters offers a smooth response and is extremely high efficiency from mid range through high range frequencies. This tweeter is TW350Ti‘s little brother, which is already established as a popular choice for HIGH SPL super Tweeter.
Its Titanium diaphragm, on a Kapton former, is light, thin and durable, for long play applications, making this tweeter perfect for Pro Audio On Wheels applications. Its sharp smooth sound is also ideal for applications where larger compression drivers may overpower a venue.
The TW350Ti-4 SLIM is designed with a cast aluminum frame to ensure quality sound and long lasting play in most any environment. Replacement Diaphragms are available.
Highlights
- Low mass CCAW voice coil at 4 Ohm
- Crystal Clear High Frequency Response
- High Output – 104 dB sensitivity
- Slim Design makes it easy to Mount
- Sold in Pairs
GENERAL SPECIFICATIONS
| Nominal impedance | 4 Ohms |
| Nominal Power Handling* | 60 Watts |
| Continuous Program Power(RMS)** | 120 Watts |
| Max Peak Power*** | 240 Watts |
| Sensitivity 2.00V at 1m | 104 dB |
| Recommended Hi Pass Crossover For Full Power Handling | 5000 Hz 12db Per Octave Crossover |
| Frequency Response at -10dB | 4,500 – 20,000 Hz |
| Voice Coil Diameter | 1.0” (25 mm) |
| Voice Coil Wire | CCAW |
| Voice Coil Former Material | Kapton |
| Diaphragm Material | Titanium |
| Flux Density | 1.45 T |
| Magnet Material | Ferrite |
EXTRA INFO
| Overall Depth | 1.67” (42.5 mm) |
| Mounting Depth | 1.32” (33.5 mm) |
| Overall Width | 3.21” (81.5 mm) |
| Overall Height | 3.50” (89 mm) |
| Cutout Diameter + Terminals | 2.83” (75 mm) |
| Net Weight | 1.37 lbs (0.62 kg) |
| Shipping Weight | 1.47 lbs (0.67 kg) |
| Carton Dimensions W x L x H | 3.75” x 7.10” x 2.00” (95 x 180 x 50 mm) |
