Overview

The Tilta Float System works in conjunction with the DJI RS 2 gimbal to provide a small, compact camera stabilizer system to allow you to accomplish smooth cinematic camera movements with smaller camera setups. The counterweight-based post provides further stabilization for your setup beyond what the gimbal is already doing to allow for the smoothest possible free flowing camera movement imaginable. Also, the spring-loaded arm and support vest design puts the weight of the rig onto your torso, allowing for longer operating times before the user gets fatigued.

Create dramatic, smooth cinematic moves using your DJI RS 2 handheld gimbal without back or arm strain with the Float Handheld Gimbal Support System from Tilta. The Float system features an adjustable vest, stabilizer arm, adjustable gimbal extension post, wireless thumb controller, wireless receiver module, V-mount battery plate, monitor bracket, power and control cables, smartphone mounting bracket, tool kit, and a carry case to store and transport the entire system.

The Float system supports an RS 2 gimbal rig up to 22 lb, and it mounts onto the extension post. The post can extend from 19.6 to 39.4" for just the right height for your shot, and it mounts onto the stabilizer arm. The stabilizer arm supports approximately 31.5" of up and down movement to keep the stabilizer even steadier. The stabilizer arm mounts on the adjustable vest that fits waists from 23.6 to 47.2" around to create comfortable support and take the load off your back and arms.

The V-mount battery plate mounts onto the rig and allows you to power accessories and your gimbal via the system's extension post using a single, optional high-capacity battery and the included power cable. The wireless thumb controller mounts onto the rig so you can control the gimbal's movement without needing to be close to the gimbal. It connects to the receiver via 2.4 GHz Wi-Fi from up to 229' away (line-of-sight) and features a shoe mount so it can mount onto a handle or other rigging. The included smartphone mount allows you to add a smartphone to control your gimbal as well as preview the image, and the monitor bracket allows you to add an optional monitor to your rig.

Optional accessories are also available separately, such as an RS battery counterweight bracket, TB50 battery plate, and bottom counterweight bracket.

 

  • Stabilizer arm and vest with adjustable mounting post to support DJI RS 2 gimbal
  • V-mount battery plate to power gimbal
  • 22 lb load capacity
  • Durable carbon fiber and aluminum construction
  • Wireless thumb controller and receiver to control gimbal movement

 

(1) Tilta Float System Arm (GSS-T01-ARM)
(1) Tilta Float System Post (GSS-T01-PST)
(1) Power Supply Base Plate for RS 2 (TGA-PBP) with Cable (TCB-DTP-2LE-40)
(1) Tilta Float System V Mount Battery Plate (GSS-T01-BPV)
(1) 2-Pin Lemo to 2-Pin Lemo Cable (20 cm) (TCB-2LE-2LE-20)
(1) Tilta Float System Support Vest (GSS-T01-SV)
(1) Wireless Thumb Controller for RS 2 (GSS-T01-WTC)
(1) Wireless Control Receiver Module for RS 2 (TGA-WCR)
(1) Tilta Float System Monitor Bracket (GSS-T01-MB)
(1) Tilta Float System Carrying Case (GSS-T01-CC)
(1) Tiltaing Adjustable Cold Shoe Phone Mounting Bracket (TA-PMB-B)
(1) Tool Kit for Tilta Float System (GSS-T01-TK)

Tilta Float System Specs
Product dimensions: 835x345x210mm
Product weight: 10kg (Net Weight 7.5kg)
Materials: Carbon fiber, aluminum, plastic, and nylon fabric

Tilta Float System Support Vest
Vest Size: 600-1200mm
Extension: Built-in Tilta standard 15mm quick release baseplate.

Tilta Float System Arm
Connector post diameter: 12mm
Maximum payload capacity: 10kg
Up and down movement range: 800mm (±4300)

Tilta Float System Post
Material: Carbon fiber and aluminum
Mount: NATO rail
Power input/output: 2-pin LEMO
Length range: 500-1000mm

Tilta Wireless Thumb Controller for RS2
Cold shoe mount
2.4 GHz wireless module
Remote control range: 50-70m (Dependent on the location, there might be a slight
variance.)

*The Wireless Thumb Controller requires a single GoPro Hero 5-8 Battery to power which is not included*

 

*If you need the AB mount, please feel free to contact us.*

PushAuction