eBay

Product Description

CNC Tool Presetter Setter Automatic Setting Gauge Z axis Probe Tool Touch Sensor

Specifications：

Model : Automatic tool setting

Color : Black + Silver

Material: Grinding 4S+ superhard alloy

Normally closed specification technical parameters

Output mode: BNC (normally closed)

Pre-trip: almost zero

Stroke: 5mm

Repeatability: 0.001mm (condition: operating speed 50-200mm / mm)

Contact life: 3 million times

Protection structure: IP67

Contact force: 1.5N

Contact material: super hard alloy

Housing material: grinding 4S

Contact rating: DC24V 20mA (MAX) (recommended value 10mA) resistance load

Cable: 1.6m oil resistant °4 core ∞5 tensile strength 307N minimum bending radius R7

Protection tube: minimum bending radius 1 m R25

Alarm signal when the trip is exceeded

Output mode: BNC (normally closed) (2.5mm from the measurement signal)

Contact rating: DC24V 100mA (resistive load)

Installation instructions：

1, the props and the tool setting device must be perpendicular to the contact surface, and vertically contact the contact surface, please install as much as possible on the workbench where the iron filing area is small.

2, please be sure to use the voltage within the rated power supply range, please control the DC10-30V, the current is below 20mA, the ambient temperature range is -25° C-70° C. 3. Please control the cutter tool diameter below 20mm and the cutter speed to be below 50-200mm/min. The tool center should fall to the center of the tool face

When using the blowing function, the air tube has a diameter of 6 mm and an inner diameter of 45 mm. Take care to remove the iron filings and cutting oil attached to the contact surface.

Terms and Conditions：

1, the contact can not exceed the stroke of the tool, otherwise the tool and the props will be damaged. (formed as 5.0mm)

2. Please do not release it immediately when touching the tool setting tool by hand to avoid damaging the internal structure of the tool setting tool.

3. When the tool and the tool setting tool are in contact with the tool setting, please do not release it immediately. The tool must be lifted off the contact surface vertically. It cannot be moved laterally. If it moves laterally, it will damage the tool setting tool.

4. When using the blowing function, the air tube has a diameter of 6 mm and an inner diameter of 4-5 mm. Take care to remove the iron filings and cutting oil attached to the contact surface.

Package included:

1 x Open CNC Z Axis Engraving machine

About Us
Payment
Shipping
Returns

We are aiming to bring the best products as well as service to all of the customers . If you have any needs or questions, please don't hesitate to contact us at any time .

Please don't leave any negative or neutral feedback before contacting us , if you have any problem, please contact us in the first time by ebay message. That would be very appreciated .We must do our best to help you out .Please believe in us .

Enjoy your shopping time here.Many thanks !

We accept PayPal only.

All PayPal payments must be confirmed (shipping and billing addresses must match).

Payment must be received within 7 business days of auction closing.

We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is the same and correct before you pay.thanks.

1,We ship items to your PayPal confirmed address only. Please make sure your address in PayPal is matched with your shipping address on ebay before you pay.

2,We are unable to take any responsibility for wrong address, any custom delay or tax. Because transit time is highly depended and provided by Postal Service.

3.Items will be shipped within the handling time as we promised.

4.The ETA Delivery time depends on destination and other factors.(public holidays., natural disasters, customs issue and other unexpected impact, etc)

Import duties, taxes, and charges are not included in the item price and shipping cost. These charges are the buyer's responsibility.

Please check with your country's customs office to determine what these additional costs will be before prior to bidding or buying.

If you have any request or question about our handling and shipping, please feel free to contact us via eBay message.

In a word, we will do our best to serve you.

If you are unsatisfied with the items received ,please contact us (via eBay Message) first before you operate the return or leave feedback .

We must go to the extreme length to solve all of the issues in the first time.

If you have not received your products within 30 days from payment, please contact us. We will track the shipment and get back to you asap. Our goal is

customer satisfaction!

About Us