Applicable Headunit models:
- This ACEHD02LRB only works with the A6 KarLink Version, F7 Series, and S8 Series head units. It is NOT compatible with A6 Series (Except for the A6 KarLink Version), SA102, or any other car stereos. Besides, S8 models manufactured before Jan. 2021 (also known as S8 Gen 1) can support ACEHD02LRB, but the system firmware update is required before the LRV feature can work properly. See the rearview camera comparison table below for more details.
Specifications：
- Product Model: ACEHD02LRB (North American version, with a license plate mounting bracket)
- Image sensor format: 1/2.9” CMOS
- Pixels：1280(H)x720(V)
- White balance: automatic
- Backlight compensation: Yes
- Noise reduction: 3D DNR
- Video Frame rate: 720P@30FPS
- Video Signal Out：Analogue HD signal, 1.0 Vp-p / 75Ω
- Working Voltage: DC 3.3V～5V
- Working Current: 130mA～150mA
- Working Temperature：-30℃～+80℃ (-22°F ～ 176°F)
- Rear-view guideline: Not built-in, provided by Car stereo system
- Waterproof Rate: IP67
- Night-vision: YES
- Lens Viewing Angle: 150 Degrees
- Powering method: powered by ATOTO Headunit or vehicle's Accessory (ACC).
- Rearview Image Access: (1). When a vehicle is in reverse gear, the rearview will display on the head unit display; (2). Manually run the Rearview app when the vehicle is moving ahead, or use steering wheel keys (if applicable). For selected S8 (Gen2) modes that come with Hand Gesture operation, gesture control is available;
 |
HD 720P Rear-View Video Signal OutputTraditional car stereos can only take and display 400-600 lines CVBS rearview video signal. Working with specific ATOTO head-unit models, The ACEHD02LRB can output an HD 720P rearview video signal, and you can have an HD color display on the ATOTO head unit. Say goodbye to the snowy static picture screen when reversing a vehicle. |
 |
How does the LRV feature Work?ATOTO LRV (Live Rear-View) technology Live RearView (LRV) Feature - Access Rearview even if the vehicle is moving ahead. This could remove obstructions caused by passengers, headrests, and the vehicle’s roof and rear pillars, increasing the field of view and allowing the driver to have an unimpeded view of the lanes behind and traditional blind spots. To use this feature, special wiring is required, see below for reference. |
Easy Installation, compatible with selected ATOTO S8 (Gen2) models
Unlike traditional backup cameras that are powered up by reversing lamp of the vehicle, ACEHD02LRB is rewired to be powered by a head-unit or vehicle's ACC power (Accessory) wire. And built-in hardware in the selected ATOTO head-unit is required to make sure the camera's video signal can be read and displayed without putting your vehicle into reverse gear.
On Jul 16, 2024 at 03:47:59 PDT, seller added the following information: