FlySky FGr4B 2.4G 4CH 3 Micro Mini Receiver PWM/PPM/i-bus/S.BUS/i-bus2 Output for PL18 NB4 NB4 Lite AFHDS 3 Transmitter for RC Car Boat
Features:
The FGr4B receiver adopts Flysky's third-generation automatic frequency hopping digital system (AFHDS 3).
It uses a single-antenna bidirectional transmission system and is uniquely designed to install and output PWM/PPM/i-bus/S.BUS/i-bus2 in signals.
It supports all AFHDS3 transmitter.including FlySky PL18,NB4, NB4 Lite Transmitter.
Compact size and light-weight design,easy installation.
Specifications: User Manual
Brand Name: FlySky
Item Name: FGr4B Receiver
Model: FGr4B
PWM Channels: 4
RF: 2.4GHz ISM
2.4G Protocol: AFHDS 3
Antenna: Single Antenna
Input Power: 3.5~9V
Data Output: PWM/PPM/i-bus/S.BUS/i-bus2
Temperature Range: -10℃—+60℃
Humidity Limit: 20%~95%
Online Update: Yes
Dimensions: 17*29*16.6mm
Weight: 6.4g
Model Type: Car/Boat ect
Certification: CE，FCC ID: N4ZFGR4B000
Adaptive transmitter: all transmitter supporting AFHDS3 (PL18,
NB4,NB4 Lite etc.)
Binding:
- Press and hold the receiver BIND button [5] while powering on the receiver ,release the BIND button after receiver is powered on or powering on the receiver first, press and hold the BIND button 3 seconds , the LED [7] on the receiver will flash rapidly;
- Put the transmitter into bind mode;
- The binding process is complete when the LED on the receiver stops flashing and is on continuously.
If a transmitter that has had its radio frequency (RF Standard) set to “AFHDS3 1 way” (please refer to your transmitter user manual) enters bind mode, the receiver LED will instead flash slowly. Exit bind mode on the transmitter and if the receiver LED stops flashing and is on continuously, the binding process is complete.
- Check to make sure the transmitter and receiver functions are working correctly, repeat steps 1 to 3 (binding process) if any problems arise.
Compatibility:
The FGr4B receiver is compatible with all AFHDS 3 transmitters (Note: It is currently applicable to PL18 1.0.55, NB4 2.0.93 and NB4 lite 1.0.10 and later versions. The high-frequency library used by the firmware is version 3.0.)
1 x FGr4B Receiver
Note:
Only the above package content, other products are not included.
1.Due to the difference between different monitors,the picture may not reflect the actual color of the item. We guarantee the style is the same as shown in the pictures.
2.Due to the manual measurement and different measurement methods, please allow 1-3mm deviation.Thanks!
Before purchase:
1.All the goods are ready stock, we will arrange the shipment at once if we receive the order.
2.Please read the item description, if you have any question, do not hesitate to contact us.
3.No warranty,if you receive a defect item,please contact us at once with item picture.
4.Use the vouchers for more saving.
After purchase:
1.If you are satisfied，please give us 5 stars praise.
2.Please contact us before you are going to give us bad review. We are helpful and will solve the problems.
Features:
The FGr4B receiver adopts Flysky's third-generation automatic frequency hopping digital system (AFHDS 3).
It uses a single-antenna bidirectional transmission system and is uniquely designed to install and output PWM/PPM/i-bus/S.BUS/i-bus2 in signals.
It supports all AFHDS3 transmitter.including FlySky PL18,NB4, NB4 Lite Transmitter.
Compact size and light-weight design,easy installation.
Specifications: User Manual
Brand Name: FlySky
Item Name: FGr4B Receiver
Model: FGr4B
PWM Channels: 4
RF: 2.4GHz ISM
2.4G Protocol: AFHDS 3
Antenna: Single Antenna
Input Power: 3.5~9V
Data Output: PWM/PPM/i-bus/S.BUS/i-bus2
Temperature Range: -10℃—+60℃
Humidity Limit: 20%~95%
Online Update: Yes
Dimensions: 17*29*16.6mm
Weight: 6.4g
Model Type: Car/Boat ect
Certification: CE，FCC ID: N4ZFGR4B000
Adaptive transmitter: all transmitter supporting AFHDS3 (PL18,
NB4,NB4 Lite etc.)
Binding:
- Press and hold the receiver BIND button [5] while powering on the receiver ,release the BIND button after receiver is powered on or powering on the receiver first, press and hold the BIND button 3 seconds , the LED [7] on the receiver will flash rapidly;
- Put the transmitter into bind mode;
- The binding process is complete when the LED on the receiver stops flashing and is on continuously.
If a transmitter that has had its radio frequency (RF Standard) set to “AFHDS3 1 way” (please refer to your transmitter user manual) enters bind mode, the receiver LED will instead flash slowly. Exit bind mode on the transmitter and if the receiver LED stops flashing and is on continuously, the binding process is complete.
- Check to make sure the transmitter and receiver functions are working correctly, repeat steps 1 to 3 (binding process) if any problems arise.
Compatibility:
The FGr4B receiver is compatible with all AFHDS 3 transmitters (Note: It is currently applicable to PL18 1.0.55, NB4 2.0.93 and NB4 lite 1.0.10 and later versions. The high-frequency library used by the firmware is version 3.0.)
1 x FGr4B Receiver
Note:
Only the above package content, other products are not included.
1.Due to the difference between different monitors,the picture may not reflect the actual color of the item. We guarantee the style is the same as shown in the pictures.
2.Due to the manual measurement and different measurement methods, please allow 1-3mm deviation.Thanks!
Before purchase:
1.All the goods are ready stock, we will arrange the shipment at once if we receive the order.
2.Please read the item description, if you have any question, do not hesitate to contact us.
3.No warranty,if you receive a defect item,please contact us at once with item picture.
4.Use the vouchers for more saving.
After purchase:
1.If you are satisfied，please give us 5 stars praise.
2.Please contact us before you are going to give us bad review. We are helpful and will solve the problems.
if you receive a defect item,please contact us at once with item picture or video
