Sovol Filament Dryer
Sovol Filament Dryer is designed for drying filament, it is able to remove the moisture from the filament and restore the good printer quality of filament. As we all know, the filament is easy to absorb the moisture in the air, after the filament gets humid, you may have a print issue such as strings, bubbles, uneven extrusion lines, and be unable to get good print quality no matter how perfect is your printer. Even the hot end may get clogged, which is really disappointing. Therefore, the filament dryer is very essential for every 3d printer owner. For such important accessories, we gave it better features as we can.
 |
 Large Capacity:Compared to other filament dryers, Sovoll filament dryers can store 2 spools of filament with a width of less than 70 mm or 1 filament roll with a width of less than 150 mm. Which is very good news for 3d printer owners, it satisfied more people who have more different demands, like people who usually print with 2-3 kg roll, people who have two or more single extruder 3d printer, people who have IDEX 3d printer. |
 Adjustable Temperature & Time:The temperature and time both are adjustable, when you hit the function button, you can set the temperature to 40 c, 45c or 50c, hit the up button to adjust the temp. When you hit the function button again, you can set the time from 6h to 12 h, hit the up button, you can adjust the drying time. |
 Humidity Display:The humidity will show the humidity of the filament dryer box in real-time, it is very convenient for users to take a reference about the humidity of the filament. |
 Excellent Sealing Storage Function:There is a transparent silicone spacer in the edge of the box, after you lock the lid and close the 2 Teflon outlets, the filament can be stored in a vacuum environment for a long time, no need for power on. We suggest you put 4 bags of desiccants (not included in the package) inside the dryer box to improve drying efficiency & quality. |
 Two Teflon Outlets:There are two outlets made with Teflon material, which makes the filament be loaded more smooth from the filament dryer to the extruder. And when you use the filament dryer for storing filament, you can close these two outlets, when you use it for drying, you can open it for letting the moisture flow out to the air. It is a little design but makes the product much special. |
 Two Locking Clips:Two locking clips can lock the lid very tight, and guarantee that lip won't pop up because of the pull strength of the extruder when it is printing. You can use the filament dryer as a filament holder and print without any worries. |
 Recommend Settings for Different Material |
