Bench Grinder with 6″ diameter wheels, can be used for all grinding, sharpening and shaping tasks around the workshop.
250w Quiet Induction Motor
20mm Wide Coarse Grey Stone
40mm Wide Fine White Stone
Adjustable Spark Guards
Adjustable Eye Shields
Adjustable Tool Rest
Integral Mains Powered Work Light
Built-In Coolant Tray
Wheel Dressing Tool
The white stone helps to prevent heat build up and is used for sharpening heat sensitive tools such as High Speed Steel (HSS).
The other end of the grinder is fitted with a coarse Aluminium Oxide grey stone for fast removal of material. Perfect if you get a chipped chisel tip and need to remove a lot of material.
The grinder is driven by a smooth and quiet induction motor with ample power for all sharpening and grinding operations.
An integral work light on a flexible shaft ensures that the work area is well lit at all times.
The grinder sits on 4 rubber feet to provide a stable platform. It can also be secured to a work bench using the 2 mounting points provided.
Supplied with spark guards, eye shields (1 with magnifier), tool rests, coolant tray, wheel dresser, 1.75m cable and UK 3 pin plug.
Charnwood BG6 Specification
Motor (Induction) 250w (0.3hp)
Voltage 220~240v, 50hz
Max. Continuous Run Time 30 minutes
No Load Speed 2850rpm
Spindle Diameter 12.7mm (1/2″)
Wheel Diameter 150mm (6″)
Wheel Width Grey (Coarse) 20mm
Wheel Width White (Fine) 40mm
Wheel Grit?Grey (Coarse) 36g
Wheel Grit White (Fine) 60g
Work Light Bulb 12v, 10w, screw type
Assembled Dimensions (WxDxH) 400mm x 350mm x 370mm
Shipping Dimensions (WxDxH) 460mm x 270mm x 310mm
Weight 12kg
Rating Hobby
![](https://secureimages.channeladvisor.com/images/channeladvisor/channeladvisor_poweredby-en.gif)