Galvo Stage Laser Light Features:
1. This Laser show light adopts Full pure Diode solid-state (DSS) laser module diode with high stability and long life.When power on, Diode solid-state (DSS) laser output laser beam directly(similar to light-emitting diodes LED).It can works under temperature -10°- 50° stably.

Compared to DSS laser module,normal 532nm DPSS(Diode Pumped Solid-State) laser module is susceptible to temperature, its structure and production process is more complicated,the core material is greatly affected by the ambient temperature (operating temperature 15°-40°) and the stability is poor.

2. The laser show light projector comes with double layers, is compact and much lighter weight.
a. Upper layer: Optical and electric components. Dust proof designs, no maintenance costs. Electric components on the top floor, easy to install and replace. The heat is transmitted to the heat sink.
b. Bottom layer: big heat sink layer. The high speed fans will blow away the heat and keep the machine in good working temperature.

3. RGB beam diameter <5mm and divergence <1.5mrad.

4. Made of analog laser modulation. Users can dimmer the laser brightness linearly to makes the laser light more colorful.
5. Use LCD display technology, SD card functions. All the pattern sizes, sensitivity, color setting, scanner speed and mirror image, etc are setted by button. Easy to operate and understand. Lower the hardware failure rates.
Play Mode: ILDA PC Control，DMX512 (17 channels),  Sound Active, AUTO, Master/Slave.
PC control: Compatible ILDA laser show software with ILDA interface. Use electronic switches to convert full ILDA signal.
Safety configure: Single Beam Protection System(can switch ON or OFF; single beam protection system is very important system for high power laser lights), Power key switch, laser ON-OFF switch, laser remote interlock, flying rings bolt.
Safety intelligent: Automatically identify ILDA or built-in program mode. Master/slave mode, DMX512 and PC control mode, will shut off laser automatically without trigger signal.the scanner failure protection will shut off the laser signal and the shutter will block the laser output automatically, so as to avoid the single beam coming out.
Power Supply: 100~250V, 50/60HZ, 100W

Applicable place:
DJs, Bands, Bars, Pubs, Clubs, Roller skating rinks, KTV, Family party, Birthday, celebration, Wedding, Festival, Mall, Store, Shop and other places.