| ||||||
|
|
| ||||
| Product Functions | Interface Display | Smart Test | ||||
|
|
| ||||
Multimeter Mode Covered with comprehensive parameters of Multimeter,it can quickly test the DC voltage,resistance,diode,current,and frequency in the circuit system. | Oscilloscope Mode Be able to display the parameter curve diagram of the tested component, such as voltage,frequency,time,etc. | Component Activation It can generate"Activation"signals for components such as light,motors,and other on-board electronic devices. | ||||
|
|
| ||||
Relay Test Capable to test the common automotive relay,like 5-terminal relays,and 4-terminal relays. | 0-5V Power Supply Capable of setting 0-5V output voltage, used to verify the wiring condition of the tested component. | Injector Test It can output different pulse signals to the injector,and provides 4 pulse modes to better detect the condition of the injector. | ||||
|
|
| ||||
Support Multi-Language 14 languages supported, English, Spanish, German, Russian, Italian, Polish, Portuguese, French, Vietnamese, Malaysian, Filipino, Indonesian, Arabic and Thai. | Specifications and Parameters LCD: (320*240 DPI) TFT color display Working temperature: 0-60°C (32-140 F°) Storage temperature: 40-70°C (-40-185 F°) External power supply: 12V or 24V Powered by battery Minimum working voltage: 9V Maximum working voltage: 30V Maximum measuring voltage: 150V Minimum measuring voltage: 0.1V Resistance measurement range: 1 ohm~200K ohm Current measuring range: 0~18A Maximum continuous current: 18A | Package List 1pc* Electric System Tester main unit 1pc* Solid copper test probe tip 1pc* Extension connection line 1pc* Battery clamp 1pc* Relay test line 1pc* Probe adapter | ||||
Product Description AUTOOL BT160 automotive electric system tester is a Vehicle Electric System Tester to test short and open circuit. This unit is the best electrical tester to reduce the diagnostic time in automotive electrical systems |
 |  |  |
Polarity Testing Autool BT160 can test uncertain polarity of contact in the circuit of vehicle. Unroll the leads Connect red clip to positive terminal of vehicle's battery and connect black clip to negative terminal of vehicle's battery Contact the probe tip to a positive (+), the LED should light RED Contact the probe tip to a positive (+), the LED should light RED | Grounding Testing For some components of which negative terminal is required to be well grounded for large current flowing, this tester is a good tool to test their grounding. Unroll the leads Connect red clip to positive terminal of vehicle's battery. Connect black clip to negative terminal of vehicle's battery Press button to “-” side , the LED should light RED , and positive voltage is supplied. Then have the probe tip quickly contact negative terminal of component as close as possible, LED indicator turns to GREEN with buzzer sounding, which means it is well grounded. If NOT, the LED remains RED without any buzzer. | Open Circuit Test/Continuity Testing When the polarity of the circuit under test is unknown, it can be detected whether the test circuit is in a continuous or an open circuit state. Unroll the leads Connect red clip to positive terminal of vehicle's battery Connect black clip to negative terminal of vehicle's battery Connect auxiliary ground lead to one side of tested wire along with probe tip connecting to the other side. When continuity is present, the LED will light GREEN. If LED does NOT light up, NO continuity present. |
 |  |  |
Diode Test Quickly test the working status of the diode assembly & determine whether the circuit is open or continuous.
Current Overload Protection Protect the overload by disconnecting the circuit and buzzer alarm to ensure the safety of users and batteries.
Description Red LED: Positive voltage supplied or indicated Green LED: Negative voltage supplied or indicated. Power Switch: Press button to “-” side to output positive voltage; Press button to “=” side to output negative voltage.
| Short Circuit Following and Locating In most cases short circuit or instant overload of component will lead to blown fuse or circuit breaker tripping. This tester can search and locate the problem. Unroll the leads Connect red clip to positive terminal of vehicle's battery Connect black clip to negative terminal of vehicle's battery Press button to “-” side , the LED should light RED , and positive voltage is supplied. Remove the blown fuse from the fuse box and begin tracking from two terminals of the fuse socket. Use probe tip quickly contact wire. If LED lights GREEN with buzzer, short circuit or overloading component appears in this side. Please note this wire’s color or identification code. Follow the wire as far as you can along the wiring harness. Locate the color-coded wire in the harness and expose it. Cut the wire. Follow the wire in the shorted direction and repeat this process until the short is located. If there are components in the following wire, check the components individually if good or not. | Product Details Specification Operation Voltage: 6-24V DC Overload Protection: 10A Lead Length: approximately 4M (13F) Key Features Quickly check if a circuit is Positive, Negative or Open by probing it and observing the RED or GREEN LED. Quickly activate and check electric components by pressing power switch to (-) or (=) position to determine their electronic and grounding status Test continuity of switches, relays, diodes, fuses and wires by connecting them between the auxiliary ground lead and the probe tip and observing the GREEN LED Find faulty ground connections instantly Follow and locate short circuit. |
