Please note that the Kingkong 2 pro controller can scan all of the original amiibo and other amiibo nfc tag and card, except N2 Elite Amiibo.
GuliKit KingKong 2 Pro Controller Firmware (continue to update):
1. Optimize the joystick's algorithm to have faster response.
2. Strengthen the triggers's tability.
3. Fine-tune the power management strategy.
This firmware update will improve the stick sensing test circularity. The average error will be max to 0.6%, usually 0.0%-0.2%. (Other brand is more than 10%)
Warm tip: The controller must be upgraded with both firmware V1.16 & V4.6 (or a higher version).
Q: How should I do when the buttons setting is messed up?(or trigger is keeping pressed)
A: You can reset the controller by pressing the Gear and "-" buttons at the same time.
Q: How to fix when ZR, ZL are not working well?
A: Calibration is needed when King Kong controllers are upgraded to firmware V2.6. Just press the four buttons of L,R,left of D-pad and A at the same time to quickly calibrate the sticks ZR,ZL with a vibration.
Q:After a failed upgrading,my controller is dead with no response, and can not be turned on too.
A:Please upgrade the controller again. Use the USB cable to connect the controller to PC,then hold the APG button and press or double press the mode button until a flash drive shows up, next copy firmware into flash drive to finish upgrading.
Q: When I used this controller for a few months, the buttons didn't feel so smooth and even got stuck.
A: Applying lubricating oil to the buttons (including inside the springs for buttons) can make them smoother and more durable.
Q: What does it mean when the mode led is flashing?
A: Flashing mode led means low battery power. Please recharge it.
For more information, please come to GuliKit’s QA page.