BRAND NEW IN BOX AS PICTURED!!
PLEASE SEE ALL PHOTOS AS THAT IS THE EXACT ITEM YOU WILL BE
RECEIVING. PLEASE ASK ANY QUESTIONS PRIOR TO
PURCHASING. THE ITEM IS SOLD AS IS WITH NO RETURNS.
FREE SHIPPING WITHIN THE USA!
SMOKE FREE PET FREE ENVIRONMENT!
THANK YOU AND BE SURE TO CHECK OUT OUR OTHER GREAT ITEMS!
AIMS Power PWRINV2500W DC to AC Power Inverter, Also called PWRINV250012W, 2500W max continuous power, Modified sine wave, Volt meter on front panel to monitor your battery voltage, Amp meter on front panel to monitor your Current use (rate at which battery is drained), Isolated ground neutral, Over Temperature LED indicator, UPC 840271000060, Over Load LED indicator, Dual AC receptacles with protective rubber covers, On/off switch, Over Temperature protection, Over Load protection, Cooling fans thermally controlled for quiet operation, Internally fuse protected, AC output short circuit protection, Auto reset on most fault conditions, Aluminum case for optimal cooling, Pre-wired for remote on/off switch, Pre-slotted mounting plate, Instruction manual
General Information | |
Manufacturer | AIMS Power |
Manufacturer Part Number | PWRINV2500W |
Product Name | DC to AC Power Inverter |
UPC Code | 840271000060 |
Overview | |
| Modified Sine Wave Power Inverters represent the most economical solution for powering a large number of appliances. The waveform produced by a Modified Sine Wave Power Inverter is “blocky” resembling a set of steps whereas the waveform produced by utility companies is smooth much like a curvy road. Therefore because of the type of waveform the Modified Sine Wave Power Inverters produce they are suitable for most applications. Modified Sine Wave Power Inverters are more efficient in converting battery power to AC. So if you’re looking to make a pot of coffee run a heater or air conditioner or appliances that can withstand occasional electrical noise a Modified Sine Wave Inverter is a cost-effective solution. To select the right inverter first determine what devices you would need to run in the event of a power outage. Then select the appropriate inverter that can carry the combined wattage requirements of these devices. Some appliances have a start up amperage. To see a list of average start up requirements see our Technical Support section on the left nav bar of our website. At AIMS you’ll discover our inverters range from 75 watts up to 8000 watts – more than enough to power nearly every application imaginable. Powerful Includes all features such as volt meter watt meter 8 replaceable fuses and thermally controlled fan. This inverter has been tested in our facility to continuously run at 2500 watts. | |
Features | |
| |
Specifications | |
| Continuous output power | 2500 Watt |
| Surge power capability (peak power) | 5000 Watts |
| DC input / operating voltage | 10 to 15 Volts |
| Output voltage | 120 Volts AC +/- 10% |
| Output wave form | Modified sine wave with phase correction |
| Output frequency | 60 Hz +/- 1 Hz |
| Battery low voltage alarm | 10.5 +/- 0.5 Volts |
| Battery low voltage shutdown | 10.0 +/- 0.5 Volts |
| No load current | 0.45 amps with switch in the on position |
| Full load efficiency | 90% |
| 1/3 load efficiency | 95% |
| No load minimum operating temperature | -15 degrees Celsius |
| Full load maximum operating temperature | 55 +/- 5 degrees Celsius (automatic shutdown) |
| AC Output Socket Type | Dual Type 2 -3 prong |
| High input voltage protection | 15V-17V |
| Low input voltage shutdown | 10V |
| Product size (L x W x H) | 15" X 10.25" X 3" |
| Weight | 13.5 lb |