CHD-210 CG

Fits: 01-06 and 07 Classic GM Heavy Duty Crew Cabs
Approx. Empty Weight: 27 lbs
MDF Construction
Installs under the rear seat
Must swing jack out of the way
No other modifications required
Does not affect rear seat latching
Forward folding function slightly affected
Holds 2x10" round subs
Cutout Size: 10"=9-1/8"
Mounting Depth: 6-1/8"
Based on 5.75" dia. magnet
Volume: .55 cu.ft per chamber
Sealed Box, separated chambers
Finish: Charcoal Gray Carpet
Terminals: Installed
Subwoofers Sold Separately

We have been asked over and over again if we had anything for the GM full size crew cab HD trucks.  So we went to work on a radical new under seat sub box design for this truck.  The result: a dowfire box that fits neatly under the rear seat and packs one heck of a wallup.  This box hits so hard you will not believe it.  Hands down, this is easiest and simplest way to get big sound in your HD crew. 

As you can see from the photos our under seat subwoofer box is designed to fit both the bench seat rear and the 60/40 split rear seat.  You've probably noticed that there aren't a lot of boxes out there for this particular truck.  And nobody does one for the newer style split seats without major modifications required to the truck.  Many of the boxes out there are quite generic-looking or don't fit too good.  Not to mention that when they say you must remove this bracket or that bracket, they actually mean that you have to "cut" the bracket out of the truck.  Not with our under seat subwoofer box.  Our box requires no modifications to the truck whatsoever. The box fits great and sounds even better.  It molds around every part of the under seat area, including all the tricky seat bracing and supports for an authentic-custom look.  You don't even have to take out the jack.  One of our customers suggested that you can drill another hole in the bass plate of the jack so it can simply be rotated out of the way and re-positioned.  Other than that, just drop the box into place and start thumpin'.  

This is a two-chamber sealed box with .55 cu.ft. of air space per chamber. It is meant for two 10s.  There is no way to fit 12s in this box so please do not ask.  Two 10s were a challenge and pound quite nicely.  Standard mounting depth is now 6-1/8".  

This box is a must-have if you like your bass low and loud in your HD crew cab.  With out a doubt, this is the loudest best sounding style box you can put in your crew cab, making this box our best selling box for this truck.  Don't settle for anything less than a quality  crew cab box from Subthump.