NEW CHROME PLATING & NEW LOW PRICE! (Patent Pending)

12" Olympic Sleeve & Resistance Band Barbell Adapter for 1" or 1.25" Bars

These will not work with 50mm plates (they usually have a steel center piece).  50mm is .4 SMALLER than 2” inches so these adapter will be too big for your plates. See the pictures to confirm your plate and bar size.  

DIY Olympic Bar, Dumbbells and Resistance Band Bar in 45 Seconds

Please confirm the hole diameter of your plates prior to making your purchase.  We can not be responsible if your plates are smaller than 2”.  We will have 50mm adapters back in stock soon. 

WHAT IS INCLUDED IN THIS PURCHASE
This purchase is for

• (1) 12" Inch F2 Olympic Sleeve Adapter
• (1) F2 1" Bar MODIFIER
• (1) F2 1.25" Bar MODIFIER  
• (1) F2 Connector bolts

• NO Barbell or weights are included and all other images and equipment shown are for demonstration purposes only. 

(We also have different sizes such as 8" and 12"  long Olympic sleeves.  Please see our other listings to purchase the one that's right for you)

WHO THIS PRODUCT IS FOR:

• People that don't have space to fill their room with only Olympic plates
  
• Athletes that don't want to pay for overpriced Olympic barbells and plates
  
• Anyone that doesn't want their existing equipment investments to go to waste!

This PATENT PENDING solution allows you to COMBINE Olympic Plates with Resistance Bands!  By combining free-weight with resistance bands, you'll have the natural feel of lifting with free-weights, but you can easily add MORE, INCREMENTAL RESISTANCE with the resistance bands.  

BENEFIT
The BEST USE for this adapter is use with equipment like leg extension machines that have a single 1" bar you'd like to convert to a 2".  The benefit of this single purchase is that it you're already using sleeve adapters for your barbell, you won't have to take them off your barbell just for a single piece of equipment (and you don't have to purchase two).

The benefit of using the ALLN-1 eye bolt locking mechanism is that it allows you to easily attach resistance bands DIRECTLY TO THE ADAPTER instead of wrapping it around the bar.  

Additionally, as shown in pictures, if you only have one set of 45 lbs but want to add more weight, you can easily add more resistance with resistance bands--and still receive the training benefits of Time Under Tension. 

This innovative combination of using bands and weights, is not only a smart way to save money on your training equipment, it's also a SAFER for those time when you don't have a spotter.  Because training to failure with a set of 45 lbs and bands, will give you more confidence to trainer harder and further toward your normal point of failure...because you don't have to worry about dropping six 45lbs. plates on your neck.  

VRS STRAP UPGRADE

*VRS Strap Sold Separately


By using VRS POWER Straps, you can focus on lifting heavy weights without worrying about the risk of injury. This can help you train harder and make faster progress. bar.

*VRS Strap Sold Separately

The VRS Straps were designed to give you the confidence you need to train to your max, while reducing the risk of strains, sprains, and other injuries.  

4 MORE Ways to Connect and Use F2 Olympic Adapters

1. USE VRS STRAPS (NOT INCLUDED):
   Replace chains with VRS Straps to easily connect F2 Adapters like chains. But, unlike chains, VRS Straps have the added benefit of allowing you to GRIP the straps to do additional exercises like farmer carries.
   
   
2. USE CARABINERS: 
   Connect carabiners to the ALLN-1 eye bolt locking mechanism, connect bands to the carabiners 
   
   
3. USE DIRECT BAND CONNECTION (BANDS NOT INCLUDED): 
   If your bands are small enough, run them through the eyelet and tie the bands into a knot
   
   
4. USE ALLN-1 VRS Clips (NOT INCLUDED): 
   This method allows for the most flexibility because you can connect multiple weighted/types of resistance bands to the bar using the VRS Connection method (you can also connect resistance bands without plates).

Once connected, just lift!

• HOW TO GUARANTEE THEY'LL FIT YOUR EQUIPMENT 
  With fitness equipment 1", 1.25", 2" and "Olympic" plates are NOMINAL terms which means that those aren't the EXACT size of your equipment. Please confirm the EXACT size of your bars and plates before purchasing these adapters.

Easy 1-2-3 Weight Stack Setup for other F2 Olympic Adapter Configurations

Belt Squat

Resistance Band Connectors

Loader Pin/Kettlebells

Yoke Stack

BEST WAY TO USE
The inventor of these clips has been in fitness for over 30 years as a competitive bodybuilder and fitness consultant.  And upon realizing that CONSISTENCY in a training routine is the most important aspect of training, he set out to develop he could maintain his training routine when there wasn't access to a gym with an unlimited amount of weights (years before the pandemic).  The solution was to rethink how resistance bands could be modified, beyond just WRAPPING THEM AROUND A BARBELL or BENCH, and to add quality resistance to training routine, while maintaining the benefits of both the eccentric and concentric movements.  The end result was a combination of our VRS training system.  It consists of ALLN-1 Olympic Resistance Band Bar, VRS Clips, VRS Bands and the latest edition, our ALLN-1 Olympic Resistance Band Bar Adapter.  Best of all, you can purchase them individually or as a complete system.

WHAT TYPE OF BARS CAN THE ALLN-1 OLYMPIC RESISTANCE BAND ADAPTER BE USED ON?

- While the adapter was originally designed to work with the ALLN-1 Olympic Resistance Band Barbell, they can be used on any 1" or 1-1/4". 

- This purchase is meant to work with 1"or 1.25" barbells . 

- We also have other size F2 Adapter Olympic sleeves available.  Please see our other listings to purchase the one that's right for you)    

HOW DO THE ALLN-1 OLYMPIC RESISTANCE BAND BAR ADAPTER WORK?
Simply slide the F2 Adapters  over the end of your bar and lock it in place, using our 

• Patent pending ALLN-1 eye bolt locking mechanism 
• Standard lock-nut.  

::: SAME DAY SHIPPING :::
Orders placed before 2PM PST will ship the same day.

We'll also have unique, specific Olympic resistance band workout routines and videos on our site we'll share with you after your purchase.

HOW-TO: USE F2 Adapters used with ChainBeast (Starts at 1:25)

Note: We can create and fabricate custom fitness equipment and adapters as well.  Contact us for to start the creative process, today!

This product is so solid we include our 3 year parts guarantee!*