★ Assist more work! "4 modes of fun"
★ Implement excellent cornering performance with the slimming of the head section

● Realize excellent cornering performance with the slimming of the head section
By slimming the head section, the inclination at the time of corner Angle realizes industry minimum * 2. Screw tightening at the wall and ceiling
Reduces cam out by improving work time.

● New one touch bit sleeve
The load applied to insert the bit is reduced by about 50% compared to the conventional machine,
In addition, new one-touch bit sleeve is adopted with reduced unexpected bits during work.
Smooth bits are made possible.

● Equipped with write mode
A positive reverse change switching lever pulls a trigger while the trigger is pulled when the light is lit.
Dark work sites can also be used as LED lights.

● New adoption of double ball bearing in bearing part! Bits are hard to swing and hard to tighten!


● Equipped with LEDs of 2 lights on the left and right!
Visibility is improved and the bit is difficult to shadow the scene of bis.

· Maximum tightening torque (N · M): 180
· Mass (kg): 1.5
· No load rotation speed: 0 to 3600
· Number of strikes: 0 to 3800
· Tightening ability (mm): small screw M4 ~ M8, normal bolt M5 to M16, high power bolt M5 to M14, course thread 22-125
· Rotation number (Min-1) [Rotation / minute]: Fastest 0 to 3,600, strong 0 to 3,200, medium 0 to 1,100, weak 0 to 1,100, wood 0 to 1,800, bolt (time of normal rotation) 0 to 3,600, text For (thin plate) 0-2,900, for text (thick plate) 0-3,600
· Number of strikes (min-1) [回 / minute]: Fastest 0 to 3,800, strong 0 to 3,600, medium 0 to 1,100, Wood 0 to 3,800, bolt (time of forward rotation) 0 to 3,800, text For (thin plate) stopping immediately after the start of hitting, for text (thick plate) 0-2,600

【set content】
Body, plus vit 2-65, hook, instruction manual
※ It is a variant from a new set. New and unused
※ Battery, charger, and case are not included.
※ Makita 18V Battery BL1830B, BL1840, BL1850B, BL1860B, etc. can be used.

[Notice to those considering electrical appliances]

Japanese products are manufactured at the standard Japanese voltage of 100V 50/60Hz.

If your country uses higher voltage, you need a transformer.