ELITE 2000.4

 With a powerful 2000 Watts RMS in 4 channels and impedance of 1Ohm per channel, the amplifiers of the new ELITE line are very versatile, allowing different types of installation with a single amplifier.  Thanks to its FULL-RANGE frequency response range, the ELITE fits into any project with: Subwoofers, Woofers, Low-Mid, Horns or Super Tweeters.  Versatility is another strong point, being possible to make connections in 4, 3 or 2 channels, when used in Bridge connections.  With the ELITE 4000.4 it is possible to connect a complete medium-sized sound system, enjoying the audio quality already established by BAND AUDIOPARTS and a low consumption.

 Technical specifications

 Maximum Power 14.4v @ 1 Ohms: 4 x 600 WRMS

 Maximum Power 14.4v @ 2 Ohms: 4 x 400 WRMS

 Max Power 14.4v Bridge @ 2 Ohms: 2 x 1250 WRMS

 Maximum Power 12.6v @ 1 Ohms: 4 x 500 WRMS

 Maximum Power 12.6v @ 2 Ohms: 4 x 300 WRMS

 Max Power 12.6v Bridge @ 2 Ohms: 2 x 1000 WRMS

 Efficiency @ 2 Ohms: 86%

 Efficiency @ 1 Ohms: 80%

 Input Voltage: 9 - 15V

 Input Impedance: 100K Ohms

 Output Impedance: 1Ohm

 THD+N: <1%

 Input Sensitivity: 220mV – 4V

 Signal to Noise Ratio: 80dB

 Frequency Response: 5 to 22kHz (-3dBs)

 HPF (Subsonic): 20 to 90Hz @ 12dB/octave Linkwitz-Riley

 LPF (Crossover): 90 to 20kHz @ 12dB/octave Linkwitz-Riley

 Recommended Fuse: 100 A

 Standby Current: 1 A

 Maximum Current (sinusoidal signal): 210 A

 Maximum Current (musical signal): 100 A

 Power Cables (recommended min.): 21mm / 4 AWG

 Output Cables (recommended min.): 2 x 2.5mm / 2 x 13 AWG

 Weight (Kg): 3.3

 Height (mm): 54

 Width (mm): 209

 Depth (mm): 243

 Attention: According to Federal Law nº 11.291, prolonged exposure to noise greater than 85 dB can cause damage to the auditory system.

 NOTE: The installation of Banda Audioparts Amplifiers must always be carried out by a qualified professional.