MODERN ARCHITECTURAL BLADE FENCING
CUSTOM SIZES TO SUIT ANY JOBS
Direct from the Warehouse
THIS IS A DIY PRODUCT AND EASY TO FIT & INSTALL
USING OUR EXCLUSIVE DIY FIN BLADE SYSTEM
How to Get Fast Prices
- Message us that you want BLADE FENCES
- Tell me what height and width
- Tell me colour of slats
- Tell me if you want 24mm or 64mm or 104mm gaps between the slats
For example a typical 2200 wide x 1400 high screen or fence with 104mm gaps and built Vertical slats and in Black, white or Dark grey would be $503. That works out at $164 per SQM. This is a Cut to Size then flat packed as a DIY kit
The multi-purpose top and bottom rail that we have developed have holes pre-punched every 40mm to give you a prefect vertical fence system that you can do DIY in any width or height that your job requires. These 2 horizontal rails per panel allow the screws to sit inside then an aluminum cover conceals all the fixings for a great looking finish.
Select your between each blade width to get an accurate Quote. Obviously the closer the blades the more privacy but also the more aluminum is used so higher the price:
• Connecting your blades every 40mm will leave gaps between slats of 24mm
• Connecting your blades every 80mm will leave gaps between slats of 64mm
• Connecting your blades on the 40mm will leave gaps between slats of 104mm
The slat blades are 65mm x 16mm, so they will protrude out past the post rail by 65mm. The screw connection system is super strong with our internal ribs inside the blades and the extrusion has been tested and when fitted is as strong as welding.
The slats and rails come in 3 colours; Satin Black, Dark Grey or Gloss White.
The VERTICAL SLAT and HORIZONTAL RAIL COLOURS ARE
Dark Grey - Flat
Satin Black
Gloss White
You can build your fences or screens between Aluminium posts or your own brick piers or other post material like timber or steel.
We carry 76x76mm or 100x100 Aluminium Posts here.
DIY System
• Strongest blade slats in Australia with 2 internal ribs for strength and screw connection
• Powder Coated
• TOP QUALITY ALUMINIUM, NO RUSTING, SUPER STRONG - No paint ever!
• 3 Slat Colours to choose from: White, Black & Dark Grey
• Usually you fit you bottom and top rail around 10% of the overall slat length
• Full concealed black fixings
• Caps for the top and bottom of each blade; Either black or white plastic caps
• Plugs provided for excess holes in horizontal rail. Half of our customers do not use them. Either black or white
SIMPLE TO USE INSTRUCTIONS BELOW – All fittings generally in stock
• Connect the top and bottom 40x40 rail with the 2 brackets to the internal centre or edge of your post or pier on both sides. Use the speed sheet cutting sheet to know while hole the first slat goes into. NOTE: It may not be the first visible hole
• Decide where the rail will screw to blades. Typical way to decide is use 10% of the slat length. Then use that as the intersection for the top and bottom rail to the slats. So if slats are 1200mm long then use 120mm from top of slat to the rail and also 120mm from bottom of slat to the rail.
• Using a tape, measure down each slat edge from the top with a bright marker
• Using 2 people screw the first slat through the predrilled hole in rail then into the edge of the slat on that mark.
• Continue the entire rail with top screws. Use the 2nd person to hold slat firm to rail.
• Once completed screw in the bottom. Normally no measurement is required for the bottom as the bottom rail should be firm and square
• Leave your gap between slats as shown on speed sheet.
• If you need posts then 76x76m Posts are $33 per metre or 100x100 are $66 per metre
WE ALSO MAKE SLIDING GATES TO MATCH- WE CUT, YOU MAKE IT AT HOME
What you should know:
- Payment of $100 needs to be made for any custom orders for each panel
- We cut Tuesdays and Thursday each week so have orders in before that
- Protective sheets will be left on the material for you to remove.
- Allow 3-6mm difference in final sizes
- When we quote you slat gaps (24mm or 64mm or 104mm) this will be the gap between the slats. The slat and gap may not divide equally into your width so we will advise what that gap is when we give you the installation instructions. Or ask us prior to the order. Slats cant go within 30mm of the start and finish as the bracket holding the rail is there
BULKY GOODS
DELIVERY
-$140 flat rate fee to the Northside of Brisbane
-$200 flat rate fee to the Southside of Brisbane
-$250 flat rate fee to the Gold Coast, Ipswich or Sunshine Coast
-$350 flat rate fee to Sydney or Rockhampton
-$450 flat rate fee to Melbourne or Townsville
**We use backload trucks for all of the above and usually do all
drops in other country towns we pass but following that main highway.
Sometimes these deliveries will be after hours
-All other areas we can quote to a freight depot in your state or
country town
USES FOR SLATS
• Air Conditioning screens
• Fence inserts
• Fence
• Window screening
• Letterboxes
• Garbage Bin Screens
• Slat Gates
• Privacy Screens
• Decorative Panels
• Carport screening from neighbours
• Colourbond fence height extensions
No contact by EBAY Rules
Sorry, ebay does not allow us to share contact details here until you buy from us. We can quote via messages if you send through. Or you can also buy the $5 sample pack by copying and pasting this number into an ebay search: 142589493747. Then you are a customer and we can talk about your project then as you have bought something with ebay. Or checkout the postage and payment options.