Power your Raspberry Pi Build HAT projects with the Raspberry Pi Build HAT Power Supply. This 48W power supply will power the Build HAT and connected LEGO® TechnicTM motors, as well as your Raspberry Pi computer.
Compatible with LEGO Technic motors and sensors included in the LEGO® Education SPIKETM Portfolio, the Build HAT combines the power of Raspberry Pi computing with easy building opportunities to help you make creative and robust projects.
| Output voltage: | +8.0V DC |
| Minimum load current: | 0.01A |
| Nominal load current: | 6.0A |
| Maximum power: | 48.0W |
| Load regulation: | ±5% |
| Line regulation: | ±5% |
| Ripple & noise: | 6.0A |
| Rise time: | 100ms maximum to regulatory limits for DC outputs |
| Turn-on delay: | 3000ms maximum at nominal input AC voltage and full load |
| Protection: | Short circuit protection Overcurrent protection Overvoltage protection |
| Efficiency: | 87.77% minimum (output current from 100%, 75%, 50%, 25%) |
| Output cable: | 1.5m 16AWG |
| Output connector: | Barrel connector 5.5mm × 2.1mm × 11mm Centre positive |
| Voltage range: | 100-240Vac (rated) 96-264Vac (operating) |
| Frequency: | 50/60Hz ±3Hz |
| Current: | 1.2A maximum |
| Power consumption (no load): | 0.1W maximum |
| Inrush current: | No damage shall occur and the input fuse shall not blow |