Screw-in soldering tips (threaded) from pure electrolytic copper KGHM-POLAND with a purity of 99.99%, the best heat conduction. Rolled from the purest "YKY16" wire.  Extruded thread M4 + run with cylindrical hollow roller, crushed on a 60 MPa press for reinforcement, then ground 'sharpness' and whitened, so that the tips perfectly catch the tin while SMD - soldering.  

10 pieces in a set - cone shapes only, but please write in the additional comment field if you need a different type e.g. mini-wave or flattened - I always check this information (if possible please include a picture).

The tips are more durable than the original ones, they do not burn out as quickly. They are not resistant to acids or aggressive consumable fluxes, but their service life has been considerably extended (thanks to bleaching the copper with SAC305 alloy from Alpha company with 3% silver content - the layer of tin with silver causes excellent heating properties). And you get all this at a very good price. It is important to heat sensibly and clean with a damp sponge. The tips are beautifully wetted, ready for immediate soldering - the pictures do not fully reflect this, because they have been greatly enlarged. 

I highly recommend these soldering tips as the original ones are hard to work with, they dissolve so quickly. By default I send 10 tapered tips (cones) in each set. Flattened / bent and truncated tips or other untypical - I will send after information in comments. 

The set of 10 soldering tips is intended for the PARKSIDE soldering irons ZD-708A (BN204586), Parkside PLS48A1, PLSDA1, PLS48B1, PLS48C1, PLS48D2 und PLBS30A1 and Niteo Tools St0239-19 as well as for all others with a metric M4 thread.

*The thicker and longer soldering tips - 35 mm - will soon be available in another auction. They have a higher heat capacity and are 3 euro more expensive per set. 

Dear buyers, the tips are shipped from Warsaw. Cheap economy letters for 2 Euros (in a bubble envelope) reach practically 99% of all places in the EU. So do not be afraid to buy, the time is usually from 5 to 10 days.