ORB DF-01iA High-end Audio Vinyl LP Record Flattener for Audiophile
Description
Introducing a new model from ORB's best-selling model, Disc Flutter. The amount of information and the warm sound quality of analog discs are still loved by many fans. However, there are many people who give up because the shape is distorted due to long-term storage and the song of their memory cannot be played. Even if the warp can be played lightly, the warp or distortion of the record changes the stylus pressure, which adversely affects the sound quality and in the worst case damages the sound groove of the record board. The DF-01iA is an audio accessory that realizes accurate temperature control and time control to correct warpage and distortion of vinyl records without being affected by the ambient temperature depending on the season or region, making it playable. There are two modes, "7inch mode" and "10inch or 12inch mode", and by setting three temperature settings in each mode, it can be adjusted to the appropriate state for each size, and the weight with groove guard. It also supports the modification of the board (about 180g-200g). Bring your memories to life again with the Disc Flutter DF-01iA.
■ With accurate temperature control and time control, it can be used without being affected by the ambient temperature depending on the season or region.
■ You can select from two modes, "7inch mode" and "10inch or 12inch mode". By setting three temperature settings in each mode, it can be adjusted in the appropriate state for each size.
■ It is possible to modify the heavy board with groove guard (about 180g-200g). Collected in black and silver
■ The chic design is a luxurious finish that matches the audio room.
■ Power supply 100VAC 50 / 60Hz
■ Overcurrent protection AC line 5A fuse protection
■ Power consumption 200W (maximum)
■ Appearance dimensions W: 471 H: 93 D: 493 (unit is mm) / weight approx. 11 kg
■ Operating environment conditions Operating temperature range Room temperature (but no condensation) ・ Operating humidity range 20% to 90% (but no condensation)
■ Country of manufacture MADE IN JAPAN
■ Released in early March 2017
* Analog disc that cannot be modified with DF-01iA
Analog discs made of special materials such as flexi discs and 78rpm records
Analog disc without group guard
Analog disk deformed by heat
Uncorrectable analog discs currently known by the manufacturer (those that may damage the sound groove and become unusable) → SHEFFIELD LAB ・ BMG-UFA ・ NIXA RECORDS initial record ・ Super analog disc
Japan Gramophone stelet 33 series
* Since the physical characteristics of the material of analog discs differ depending on the time of manufacture and the manufacturer, there are some that cannot be corrected or those that damage the sound groove and become unusable. Thank you for your understanding in advance.
An analog disc whose label surface is thicker than the groove guard may have difficulty in correcting the warp. (Especially seen on 7inch boards)