Feature:

1. MULTI FUNCTION: Not only can test the standing wave impedance of the antenna, but also can debug the duplexer, the insertion loss of the filter, isolate and attenuate test cable, shorten the coefficient of antenna amplifier, phase, amplification
2. MEET ORIGINAL TECHNICAL SPECIFICATIONS: 3GHz vector network analyzer is co designed with for OwOComm. According to the LGPL license agreement, manufactured in full accordance with the v2_2 file released by the development department of for OwOComm, in line with the original technical specifications, please go to the following path to update the firmware: github vna‑v2, VNA2‑firmware, release
3. RE CALIBRATED OR RECALLED WHEN FREQUENCY CHANGE: SAA‑2N/VNA_V2.2 uses a similar user interface to VNA, but uses a different technical architecture, will not load initial calibration data at startup, nor will automatically insert calibration data after the user changes the frequency data, must be re calibrated or recalled after each power on and frequency change
4. TRANSMISSION MEASUREMENT: S21 support 70dB (50KHz‑1.5GHz), 60dB (1.5GHz‑3GHz). Reflection measurement S11 for ‑50dB (50KHz‑1.5GHz) and ‑40dB (1.5GHz‑3GHz); Antenna analyzer support 1.005 (50KHz‑1.5GHz), 1.02 (1.5GHz‑3GHz); You can flip the display to easy to use
5. FOR VARIOUS SOFTWARE: The device can be controlled from a PC via for VNA-QT software and supports for Linux, for Windows (7+), for OS X plans. Also supports VNA-Saver to extract data for display on computer and save to for Touchstore file


Specification:

Item Type: Vector Network Analyzer
Frequency Range: 50kHz - 3GHz
System Dynamic Range (calibrated): 70dB (up to 1.5GHz), 60dB (up to 3GHz)
S11 Noise Floor (calibrated): -50dB (up to 1.5GHz), -40dB (up to 3GHz)
Frequency Sweep: 100 points per second
Display: 4in, 320 x 480
USB Interface: Micro USB
Power Supply: USB, maximum charging current 1A
Battery: 3000mAh Li ion
Battery Connector: JST-XH 2.54mm
Maximum Scan Points (on device): 201
Maximum Number of Scan Points (USB): 1024
Port 2 Return Loss (1.5GHz): 20dB typ
Port 2 Return Loss (3GHz): 13dB min
VNA-QT Software Support Platform: For Linux, for Windows (7+), for OS X plan


Package List:

1 x SAA-2N Host

2 x Type N Male to Male RG142-PUR RF Cable

1 x Micro USB Cable

1 x Touchscreen Picks And Lanyards

1 x Type N Male Calibration Kit - OPEN

1 x Type N Male Calibration Kit - LOAD

1 x Type N Male Calibration Kit - SHORT

1 x Type N Female To Female Connector

1 x EVA Storage Bag

1 x User Manual


Note:

Please read the user manual carefully before use to avoid damage to the device.


1. Our listing price includes the value of goods,packaging cost,and export taxes,not including international duties.
2. duties,taxes,and charges are not included in the item price or shipping fee.
3. The duties are buyers' responsibility.Please check with your country's customs office determine what these additional costs will be prior to your purchase.
4. All disputes arising from the duties will be submitted to ebay for solution.

1. Any questions, pls. contact us via ebay message or email us.We will reply your message within 48 hours. If you do not receive our reply within 48 hours, pls. post a message again because sometimes our message system may block some emails.

2. If you are satisfied with our service, pls. kindly leave us a positive feedback and give us the Detailed Seller Rating with all "5 " in very area
3. Our aim is to provide Level Customer Service, your recognition will encourage us greatly and serve you better. We strive to keep all our customers satisfy.

https://image-us.ziopt.com/upload/third_resource/image/feedback.jpg


We will do our up most to exceed your expectations in customer service, communication and dispatching of your orders.

https://image-us.ziopt.com/upload/third_resource/image/shipc73.jpg

DataCaciques