SUPPORTS 4 SYSTEM DIAGNOSES FOR 1996& NEWER CARS :JOBD/OBD1/EOBD/KOBD/OBD2/CAN:

New added 3 reset functions,upgrade of launch crp123 odb2 scanner

√ Oil Lamp Reset

Allows you to perform reset maintenance mileage and data intervals for a new calculation of Engine Oil Life system once changed the oil. (When maintenance light is on, indicating that the car should be maintained)

√ Steering Angle Calibration

After replacing the steering angle position sensor, steering mechanical parts (such as steering gearbox, steering column, end tie rod, steering knuckle), performing four-wheel alignment, or recovering the car body, use CRP129E to reset the steering angle.

√ Electronic Throttle Position Reset

Throttle matching is to use the car decoder to initialize the car's throttle actuators, so that the learning value of the ECU returns to the initial state, so as to more accurately control and adjust the throttle (or idle speed motor) action to regulate the intake the amount.when you need?1)The ECU is replaced and the ECU does not yet store throttle working features.2)After the electronic control unit is powered off, the memory of the electronic control unit is lost.3) After replacing the throttle valve assembly. 4) After replacing or disassembling the intake port, the coordination of the electronic control unit and the throttle body will affect the control of the idle speed.5) After the throttle is cleaned

LAUNCH CRP123E Supports FULL OBD2 Functions OF ENGINE SYSTEM:

1.Reading Codes: Show the detailed description of the Diagnostic Trouble Code (DTCs)

2.Erasing Codes & Reset: Turns off Check Engine Light (MIL), clears codes and resets monitors.

3.Data Stream: Reads and displays live ECU/PCM data stream, plotting functions graphically and stores freeze frame data.

4.I/M Readiness Status: Shows whether the various emissions-related systems on the vehicle are operating properly and

are ready for inspection and maintenance testing.

5.Read Live Data Stream: Show the information of continuous data stream from a vehicle in live graphic (waveform) display.

6.View Freeze Frame Data: Check the certain vehicle conditions which are recorded by the on-board computer at the time

the emission-related fault occurs.

7.O2 Sensor Test:Allows retrieval and viewing of O2 sensor monitor test results for the most recently performed tests from

the vehicle’s on-board computer.

8.On-Board Monitor Test: Retrieves and displays test results for emission-related powertrain components and systems.

9.Read Vehicle Information:Display the information such as VIN (Vehicle Identification Number), CID (Calibration ID) and

CVN (Calibration verification number), etc.

10.Component Test:Certain vehicle components can be actuated by commands sent from the scanner to test their operability.

Live Data Stream Analyse in Graph

√ The scan tool CRP123E shows you live sensors data and provides data graphing for intuitive diagnostics and monitoring

your vehicle performance, help customers to better analyze the abnormal parameter.

√ Data recording functionality is amazing, customer can record the live data stream for up to 10, simultaneous, PID's. Once

these have been recorded they can be played back in text format and/or graph format. Playback supports two graphs (independent)

or 4 PID's graphed (combined). Playback timeline can be scrolled, paused, viewed, etc. There's quite a bit of power in the graphing.