DC 12V Ultrasonic Levitation Suspension Acoustic Suspension DIY Learn Levitator

Popular

    Product Introduction

    Type A#：
    This is a mini ultrasonic levitator device that can suspend foam balls. The device is composed of a MCU STC15W, a driving chip TC4427EOA and two 16mm 40KHz ultrasonic probes. Mainly used for students or DIY electronics enthusiasts to learn about ultrasonic standing wave levitation.
    Working principle: Ultrasonic standing wave levitation is through the existence of a certain distance between the ultrasonic transmitting end and the reflecting end (or another transmitting end) (called the distance of the resonant cavity), the transmitted wave and the reflected wave (or another sound wave) are continuously superimposed and finally form a stationary Wave, the sound wave force received by the object at the node of the standing wave overcomes the effect of gravity and finally achieves the effect of levitation.
    Feature：
    Working voltage：12V
    Size：42mm X 26mm X 53mm(H)
    Suspended object: foam ball
    Button K1 K2 not support (Reserved function)
     
    Package List:
    1x Mini Acoustic Levitator
    1x 12V DC power adapter
    1x Small net spoon
    1x Some foam balls

    Product B:

    Acoustic levitation is an interesting phenomenon: it takes advantage of the fact that sound waves carry mechanical energy in order to exert force on an object. In this case, that force is directed against gravity to make the object levitate. Unlike magnetic levitation, acoustic levitation can be used on a wide range of materials (even insects), though it is a weaker force.（This is an unassembled kit .）

    Package List:

    3D-printed TinyLev x1

    Arduino Nano with mini USB cable x1

    10mm 40kHz transducers x76

    L298N Dual Motor Drive Board x1

    DC power adaptor 9V x1

    Power switch X1

    DC female connector(5.5 X2.1mm) x1

    Button x3

    Some Jumper wires

    Some Black and red wire

    Some Exposed wire

     

     

     

    Type C:
    Feature:
    1: Small size, does not take up space
    2: Power supply is convenient, MicroUSB 5V power supply
    3: Lead out two buttons, and write the pins and provide the schematic diagram, and enthusiasts can debug the program by themselves to learn
    4: Supply current: <100mA
    5: Small and exquisite appearance
     
    Description:
    This is a mini ultrasonic levitation device that can suspend foam balls. The device consists of a single chip microcomputer, a driver chip and two ultrasonic probes.
    Mainly used for students or DIY electronics enthusiasts to learn about ultrasonic standing wave suspension. Controlling the up and down movement of suspended objects is not currently supported. Provide source code.
    Working principle: Ultrasonic standing wave suspension is that there is a certain distance between the ultrasonic transmitting end and the reflecting end (or another transmitting end) (called the resonant cavity distance), and the transmitted wave and the reflected wave (or another acoustic wave) are continuously superimposed to form a standing wave. Wave,
    The acoustic wave force on the object at the standing wave node overcomes the effect of gravity and finally achieves the effect of suspension.
    Board size: length 40* width 28* height 50mm
    Weight: 14g
     
    Package include:
    1* MicroUSB 5V Powered Ultrasonic Suspension Module DIY Kit

     

    • We accept PayPal only. But we only Accept your Ebay Address,Please Make sure it's 100% right.
    • Payment must be received in 5 business days of auction closing.
    • Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
    • Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
    • We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
    • All package need to wait 30 days(US only need 7-10 days),Please take care it.Less than 30 days,we can't take a refund.
    • If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
    • If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.
    DC 12V Ultrasonic Levitation Suspension Acoustic Suspension DIY Learn Levitator

    Product Introduction

    Type A#：
    This is a mini ultrasonic levitator device that can suspend foam balls. The device is composed of a MCU STC15W, a driving chip TC4427EOA and two 16mm 40KHz ultrasonic probes. Mainly used for students or DIY electronics enthusiasts to learn about ultrasonic standing wave levitation.
    Working principle: Ultrasonic standing wave levitation is through the existence of a certain distance between the ultrasonic transmitting end and the reflecting end (or another transmitting end) (called the distance of the resonant cavity), the transmitted wave and the reflected wave (or another sound wave) are continuously superimposed and finally form a stationary Wave, the sound wave force received by the object at the node of the standing wave overcomes the effect of gravity and finally achieves the effect of levitation.
    Feature：
    Working voltage：12V
    Size：42mm X 26mm X 53mm(H)
    Suspended object: foam ball
    Button K1 K2 not support (Reserved function)
     
    Package List:
    1x Mini Acoustic Levitator
    1x 12V DC power adapter
    1x Small net spoon
    1x Some foam balls

    Product B:

    Acoustic levitation is an interesting phenomenon: it takes advantage of the fact that sound waves carry mechanical energy in order to exert force on an object. In this case, that force is directed against gravity to make the object levitate. Unlike magnetic levitation, acoustic levitation can be used on a wide range of materials (even insects), though it is a weaker force.（This is an unassembled kit .）

    Package List:

    3D-printed TinyLev x1

    Arduino Nano with mini USB cable x1

    10mm 40kHz transducers x76

    L298N Dual Motor Drive Board x1

    DC power adaptor 9V x1

    Power switch X1

    DC female connector(5.5 X2.1mm) x1

    Button x3

    Some Jumper wires

    Some Black and red wire

    Some Exposed wire

     

     

     

    Type C:
    Feature:
    1: Small size, does not take up space
    2: Power supply is convenient, MicroUSB 5V power supply
    3: Lead out two buttons, and write the pins and provide the schematic diagram, and enthusiasts can debug the program by themselves to learn
    4: Supply current: <100mA
    5: Small and exquisite appearance
     
    Description:
    This is a mini ultrasonic levitation device that can suspend foam balls. The device consists of a single chip microcomputer, a driver chip and two ultrasonic probes.
    Mainly used for students or DIY electronics enthusiasts to learn about ultrasonic standing wave suspension. Controlling the up and down movement of suspended objects is not currently supported. Provide source code.
    Working principle: Ultrasonic standing wave suspension is that there is a certain distance between the ultrasonic transmitting end and the reflecting end (or another transmitting end) (called the resonant cavity distance), and the transmitted wave and the reflected wave (or another acoustic wave) are continuously superimposed to form a standing wave. Wave,
    The acoustic wave force on the object at the standing wave node overcomes the effect of gravity and finally achieves the effect of suspension.
    Board size: length 40* width 28* height 50mm
    Weight: 14g
     
    Package include:
    1* MicroUSB 5V Powered Ultrasonic Suspension Module DIY Kit

     

    • We accept PayPal only. But we only Accept your Ebay Address,Please Make sure it's 100% right.
    • Payment must be received in 5 business days of auction closing.
    • Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
    • Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
    • We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
    • All package need to wait 30 days(US only need 7-10 days),Please take care it.Less than 30 days,we can't take a refund.
    • If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
    • If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.

    DataCaciques