|
AZ688-2 Wireless Curing Light Descriptions:
Wireless LED Curing Light 2000mw/cm² Lamp Test Meter Optical Fiber
1. Blue-ray output wavelength:430-485nm.
2. Gradually bright, shiny,bright-wide, the work of three models to choose.
3. Three gear output timing:5s 10s 15s 20s 25s 30s 35s 40s
4. Blue-ray illumination: 5W≥18
5.The effect of curing time: 6s: 2-3mm.
6. Reliable structure and easy operation.
Technical Specifications:
Wavelength: 380-515nm2
Power density: 99-999mw/cm
Only for light probe with a circular emission window: 08-12mm
Measuring accuracy: +/-20%
Adjustable light intensity: 2000mw/cm2
Operating conditions:
Temperature :+10℃to +40℃
Relative humidity: 30% to 75%
Ambient pressure: 700hpa to 1060hpa
Technical parameters:
Output power-----------5w
Size ----------------------diameter 270*208*118mm
Weight-------------------720g
Working voltage--------100-240V AC, 50-60HZ
Packing List:
Main engine of light-curing Device------1 set
Optical Fiber--------------------------------1 piece
Battery----------------------------------------1 piece
Battery Charge Seat-------------------------1 set
Shade Board ---------------------------------1 piece
Instruction Booklet -------------------------1 piece
YS-C Curing Light Features
NAME：LED curing light
MODEl：YS-C
This high power 2700mw/c㎡ LED Curing Light has a humanity intelligent chip with a high intensity
LED light and Li-on rechargeable battery.
This device can cure all the dental resin known in the market nowadays; with a performance level far
superior than the halogen curing light's, it has 3 different working modes and it can solidify 4-5mm
Specifications:
- Blue Light Intensity: 2700mw/c㎡
- Rechargeable Li-ion battery
- Spectrum Range: 420nm- 480nm
- Power : AC110-230V / 50-60Hz
- Time option:8s/6s/4s
- Weight: 0.65kg
-Full Metal shell
Package Includes:
1 LED Curing Light Device
1 High Capacity Rechargeable Battery
1 Charger
1 Charger Socket
X2 Curing Light Feature:
Technical Parameters:
Light Source:Broad Band LED;
Wavelength Range:385 - 515 nm;
Light Intensity:> 2300mW / cm²;
Battery:Lithium-ion battery (total running time when the battery is fully charged: at least 80 minutes);
Power Input Power:AC 100-240V 50 / 60Hz;
Charging time: about 45 minutes;
Size:Handle:Φ20 mm × 240 mm; Charging stand: Φ63 mm × 30 mm (all of the above are the largest size)
Weight: Handle: 96 grams; Charging seat: 99 grams;
Operating ambient temperature: + 10℃ - + 40℃(+ 50 °F - + 70°F);
Operating relative humidity: 30% - 75%;
Operating environment pressure:700hPa - 1060hPa;
Package Contents:
1 × host handle;
1 × charging base;
1 × power ;
1 × user manual.
WOODPECKER F*LED-B Curing Light Feature:
Feature:
Model:LED.B
Wireless
Long
standby time
Working
more efficiently
Function Keys:
ON/OFF
button：
1.Turn
on or turn off the LED blue-ray output
2.Can
make the machine run
Time
setting: 5s, 10s, 15s, 20s,25s,30s,35s,40s
Technical:
Changer
input: AC 110V—240V50—60Hz
The
changer output: DC5V 1A
Lithium
battery voltage: DC4.2V
Lithium
battery capacity:2200mAh
Output
optical wavelength:420-480nm
Output
light intensity:1200—1500mw/cm2
Package:
1
X Curing light
1
X High capacitance rechargeable battery
1
X Charger
1
X Charger socket
Cv -gun 1 Sec White
Introduction:
1.Technical specifications：
1.1Dimensions: 25mm×25mm×240mm
1.2 Net weight: 280g
1.3 Power source
1.3.1 Power supply: rechargeable Lithium battery
1.3.2 Battery mode: ICR 18490
1.3.3 Battery voltage and capacity: 3.7V/ 1400mAh,Battery has protection against Over-voltage, over-current and short circuit.
1.3.4 Power Input: 100V to 240V, 50Hz/60 Hz Input Power: 10VA Power Output: DC5V/1A
1.4 Light source:
1.4.1 5W high power blue light LED
1.4.2 Checking method: the LED light is fine when the light is on during operating correctly.
1.4.3 The wave length of this product can match with the clinical dental resin solidification, such as 3M, Dentspy etc.
1.4.4 Wave length: 385nm-515nm
1.5 Light intensity: 1000 mW/c㎡~2300mW/c㎡
CV-215i Plus
Particulars
1. Product Name: LED Curing Light
2. Intended user: Dentist
3. Intended use site: Hospital or professional medical site
4. Light source: High-power blue light LED
5. Wave length: 385nm to 515nm
6. Light intensity: 800m W/cm2 -2500mW/cm2±10%
7. Depth of solidification：≥2mm
8. Power source: Rechargeable Lithium battery, 3.7V/ 2200mAh
9. Charger: Power Input: 100V to 240V.50HZ/60Hz Input Power: 10VA
Power Output: DC5V/1A
l Packing list:
1. The host*1
2. Disposable protective sleeve *100pcs
3. Charger*1
4. Wireless charging base*1
5. Shade plate*1
6. The instructions*1
PRO105
a.) 4.2 – 3.7- Battery is normal
b.) Lo- Battery is low
• When battery is low, curing light circuit will automatically compensate for power output or turn the light off. Always recharge the curing light when the battery is low Lo
• Direct charging option from transformer for easy transportation and mobility
OPERATION:
• Turn on the curing light with on/off switch
• his machine has 3S high power. full RAMP PULSE 3'+3'Five working modes. The default mode is (full power) and the default time is 10 seconds.
• Press and hold the time button for 0.1 seconds to select the time.Only three time modes of FULL RAMP PULSE can be selected, which are 05 10 15 20 25, respectively.
• Long press mode button 0.5 seconds to unlock, mode selection can be made, when no operation 30S automatically unlock, and long press mode button 0.5 seconds to unlock.
• Every change of time or mode, there will be a ‘beep’ sound. The curing light will keep the last program selected in memory
• Put on the disposable curing light sleeve to cover the whole curing light for cross-infection control. Then put on the light protective shield and light head protective ring, the curing light is ready for use
• Remove and dispose of the curing light sleeves after every patient
• Curing light will automatically turn off if not in use for 1 minute
SPECIFICATION:
Power supply:Input: AC 100-240V, 50/60Hz
Output :DC 5V/1A
Intensity High: 1600 mw/cm²
Battery: 3.6V, 2600 mAh (9.36Wh)
Handpiece dimension: Φ3.0 cm x 24 cm .
Packing List:
Main unit of the LED x1
Protective light shield x1
Transformer (100 -240V) x1
USB Type-C Chrging line x1
Instruction manual x1
AZDENT plus105
The LED Plus model is a 90-degree, 105-degree Angle with 8 watts. Use 3 blue light plus 1 purple light high-power chip. The effect of light can be seen that the light transmittance of the light cross lens reaches 97%. It is more convenient to light solidify the molars inside the mouth.
！！！Because the light emitted by one of the purple LEDs is invisible to the human eye, the LED lights appear to have only three lights on during use.
SPECIFICATION:
Power supply:Input: AC 100-240V, 50/60Hz
Output :DC 5V/1A
Intensity High: 2500 mw/cm²
Battery: 3.6V, 2600 mAh (9.36Wh)
Handpiece dimension: Φ3.0 cm x 24 cm .
Packing List:
Main unit of the LED x1
Protective light shield x1
Transformer (100 -240V) x1
USB Type-C Chrging line x1
Instruction manual x1
L800A
Features:
Packing Size: 210*148*71 mm(unit)
Packing weight: 420g
Wavelength: 440-480nm
Light Intensity: 5W≥1200mw/c㎡
Input Voltage: 100-240V 50-60HZ
Battery Capacity: DC3.7v 2200mAh
Solidification Effect:5s/3mm
JAS-2001B
Parameters
Weight:550g
Input voltage : 100-240V ,50/60HZ
Charger Socket : DC5V
Battery: 3500MAH
Wavelength : 400nm-490nm
Power: 12W
Light density :2700mw/cm²
Packing List
1. LED Curing Light ：1pc
2. Lamp Guide ：1pc
3. Battery ：1pc
4. Charger Socket ：1pc
6. Operation Manual ：1pc
7. Goggles ：1pair
CV-215GUN
Parameter：
Wavelength：440-480nm
Light power：5W
Intensity：800-1400mw/cm²
Battery：Li-on 800mAh
Input voltage：AC100-240V, 50/60Hz 0.4A Max
Output voltage：DC 5V/1.5A
Net Weight：155g
Mode selection：P1, P2, P3
Solidification time：1S,3S,5S,10S,15S,20S
Features:
·Produce the maximum light intensity safely.
· A high intensity of 1400 mW/cm2.
Operation conditions:
1. Storage Condition: Temperature: +10℃+40℃
2. Humidity: 30%-75%
3. Atmospheric pressure: 70KPa-106Kpa
4. Environment Conditions: Not near from fire equipment or flammability material.
Packing list:
The host * 1
Metal lamp holder *1
The silicone base *1
Power adapter *1
Disposable protective sleeve *1
Shade plate *1
Product specification *1
LED 1S
Parameter：
Wavelength：420-480nm
Light power：15W high power blue light LED
Intensity：800-1500mw/cm²
Battery：1400mah
Adapter input：AC100-240V, 50/60Hz
Output voltage：DC 5V/1A
Mode selection：P1-High mode , P2-Pulse mode, P3-Norm mode
Solidification time：P1: 1S, 3S P2: 5S, 10S, 15S, 20S, 25S, 30S P3: 5S, 10S, 15S, 20S, 25S, 30S
Operation conditions:
1. Storage Condition: Temperature: +5℃ to +40℃
2. Humidity: 30%-75%
3. Atmospheric pressure: 70KPa-106Kpa
4. Environment Conditions: Not near from fire equipment or flammability material.
Packing list:
Metal lamp holder *1
Switch button *1
Display screen *1
Time/mode button *1
Charging base *1
Shade plate *1
Charger plug *1
Test card *1
FDA Statement
The
sale of this item may be subject to regulation by the U.S. Food and
Drug Administration and state and local regulatory agencies. If so, you
can bid on this item only if you are an authorized purchaser. If the
item is subject to FDA regulation, I will verify your status as an
authorized purchaser of this item before shipping of the item.
Seller name:Dentistworld
City State: SHENZHEN,China
Telephone number:0755-69985450
|
We accept PayPal Only! All payments must be made within 7 days after the auction ends. Non-paying bidders will be reported to eBay. Please don't buy an item if you can't/won't pay for it.
