RAWLPLUG LOOSE BOLT SHIELD ANCHORS HEAVY DUTY MASONRY FIXINGS M6 M8 M10 M12 

Features and benefits 
- RAWLBOLT® - first ever mechanical anchor in the world, forerunner of all of the later mechanical anchors 
- For use in cracked and non-cracked concrete (ETA option 1), hollow-core slabs, flooring blocks and ceramics 
- Three-pieces expanding sleeve of maximum expansion provides optimal load and safety of use in any substrate 
- Wide range of diameters (M6 to M20) 

Applications 
- Roller shutter doors 
- Fire doors 
- Structural steelwork 
- Security grills 
- Heavy machinery 
- Pipework/ductwork supports 

Base materials 
Approved for use in: 
- Solid clay brick ≥ 20MPa 
- Hollow Lightweight Concrete Block LAC 5 ≥ 5MPa 
- Hollow Sand-lime Brick ≥ 15MPa 
- Concrete hollow floor block (eg. Teriva) 
- Hollow-core Slab C20/25 
- Hollow-core Slab C30/37-C50/60

Installation guide
1. Drill a hole of required diameter and depth 
2. Remove pre-assembled bolt and washer. Insert shield into hole and tap home with hammer until flush with surface 
3. Insert bolt with washer through fixture into the shield 
4. Tighten to the recommended torque  

Full specifications; 
    M6x10; bolt diameter 6mm; max fixture thickness 10mm; drill hole diameter 12mm.
      M6x25; bolt diameter 6mm; max fixture thickness 25mm; drill hole diameter 12mm.
        M6x40; bolt diameter 6mm; max fixture thickness 40mm; drill hole diameter 12mm.
          M8x10; bolt diameter 8mm; max fixture thickness 10mm; drill hole diameter 14mm.
            M8x25; bolt diameter 8mm; max fixture thickness 25mm; drill hole diameter 14mm.
              M8x40; bolt diameter 8mm; max fixture thickness 40mm; drill hole diameter 14mm.
                M10x10; bolt diameter 10mm; max fixture thickness 10mm; drill hole diameter 16mm.
                  M10x25; bolt diameter 10mm; max fixture thickness 25mm; drill hole diameter 16mm.
                    M10x50; bolt diameter 10mm; max fixture thickness 50mm; drill hole diameter 16mm.
                      M10x70; bolt diameter 10mm; max fixture thickness 70mm; drill hole diameter 16mm.
                        M12x10; bolt diameter 12mm; max fixture thickness 10mm; drill hole diameter 20mm.
                          M12x25; bolt diameter 12mm; max fixture thickness 25mm; drill hole diameter 20mm.
                            M12x40; bolt diameter 12mm; max fixture thickness 40mm; drill hole diameter 20mm.
                              M12x60; bolt diameter 12mm; max fixture thickness 60mm; drill hole diameter 20mm.