Up for SALE Harris®-0 Silver Phos Copper Solder Brazing Alloy Rods
• Flat Rod- 1/8" x 0.05" x ~20" • Available and shipped in packages of: 1, 3, 5, 7, or 10 sticks.
Description: NEW 0618 Harris-0 Rods .050" x 1/8" W x 19+" Long Brazing Rods. This low-cost brazing alloy is suitable for most copper-to-copper or *brass joints where close tolerance can be maintained. Harris-0 is an economical brazing alloy designed for brazing copper. This allows flows quickly at brazing temperatures so requires close joint tolerance, 0.002" to 0.007". A frequent choice for brazing copper!
*NOTE: No flux required when brazing Coper to Copper. When brazing Brass, or Copper to Brass requires using Harris Stay Silv® white brazing flux. Brazing steel or other ferrous base metals are NOT recommended with this rod.
NOTE: Rods are shipped "straight" in flat corrugated plastic, remove tape from either end rods will slide out.
CHEMICAL COMPOSITION: - Phosphorus 7.0 % - 7.5 %
- Copper Remainder
- Other Totals .15 %
TYPICAL PHYSICAL PROPERTIES:
- Solidus 1310ºF (710°C)
- Liquidus 1460°F (793°C)
- Brazing Range 1345°F- 1500°F (730°C -816°C)
- Electrical Conductivity 9.9 (%IACS)
- Electrical Resistivity 19.2
SPECIFICATION COMPLIANCE:
- AWS A5.8 BCuP-2, ASME Section IIC SFA 5.8 BCuP-2, ISO 17672 CuP 181
Please view the photos as they are an important visual part of the item description, what is pictured is what is shipped. Please ask any questions or request additional photos. Each item has been researched, tested where applicable, and described accurately to the best of our ability. 30 Day Seller Warranty. Thank you for looking. ►FREE Standard Shipping in the USA! Location: Shelf B1_Bin-3◄
|