For ELPLP75 / V13H010L75 Replacement Projector Lamp Bulb with Housing for Epson PowerLite 1945W /PowerLite 1940W 1965 1960, EB-1960 EB-1945W EB-1940W EB-1950 EB-1955 EB-1965 H471B H472 H474B

1. Item: ELPL75 / V13H010L75

2. Watt: 245/170W

3. Fit for Projectors: EPSON PowerLite 1940W/1945W/1950/1955/1960/1965/ EB-1940W/1945W/1950/1955/1960/1965

INSTALLATION AND SAFTY - You will find it is quite easy to install it into your Projector as the ways you are taking out your old lamp. Be aware of the connector make sure it connected well.

WARRANTY AND RETURN - New replaced lamp will be shipped to you when your bulb was out of work naturally in 180 days. Refundable issue, please contacts our 24 hours/7 days customer service. It is our appreciations if you need any further assistance.

If You Want Your Projector Lamp Work Last Longer, Please Note:

1.Do not allow the projector to overheat; the primary cause of lamp failure is excessive temperature stress.

2.Allow the projector lamp to cool for at least 10 minutes after powering down, and never move the projector during this period or while the lamp is on. The lamp is much more susceptible to damage while it is hot.

3.Operate your projector in a clean, relatively dust-free environment to prevent clogging of fans and air filters. These filters should be cleaned regularly.

4.Allow plenty of space around the projector's fan or exhaust so excess heat can be dispersed properly.

5.Utilize the "economy mode" if it is available with your projector model and is appropriate for your situation. This mode decreases projector brightness but the lamp will last longer.

6.Never leave a projector in very hot or very cold environments, for example in a car on a summer or winter day.