Please review the entire listing, and video to understand exactly what you're purchasing
This listing is for three brand new Nema 23 600oz (37.5in/lbs) in stepper motors rated at 3.5A, 1/8 degree, 8mm dual shaft using 4 leads, and three 26Ft. 18AWG 4 lead Double Shielded robotics grade motor cable pre-built with GX-16 5 pin female connectors soldered onto both ends.
This package includes 78ft. total of Double Shielded 18/4 motor cable which alone is very costly unassembled, and these motor cables are fully assembled.
In order to complete this package properly to support a single axis I've included 3 sets of the required panel mount GX-16 5 pin connectors for your electronics enclosure "pass through" to allow the cables to plug into them, and 3 of the GX-16 5 pin Butt connectors to attach to your motor's leads allowing your motors to plug into them on their end.
This cable motor package features a complete three axis assembly required for each of your three drives, and three motors that your CNC controller utilizes.
This cable features 6mm outer diameter for easy installation into cable chains
Here's an overview video on the motor cable.
NEW Pre-built GX-16 5 Pin 26ft. 18/4 Double Shielded Motor Cables Are In Stock...
Video will open in a new window
Using the eBay App? Paste link into a browser window:
These are the only cables of this kind on the market that provides the end user the fastest way to get their new CNC system running with the highest quality motor cables.
These motors are ideal for softer substrates like woods, carbon fiber, plastics, aluminum, and steel due to their high torque rating.
Motor wiring schematic for the Gecko is listed in the pictures above with polarities.
These motors feature double (8mm) shafts with flats machined into them for the most durability, and compatibility on the market for retorfits
*Due to high demand these units can take up to 10 days to have stock replenished in the event there sold out.
Full Specs Are below:
|
Step angle |
1.8° |
|
Current (A) |
3.5 |
|
Resistance (Ohms) |
1.2 |
|
Inductance per phase (mH) |
3.9 |
|
L0 Dimension (mm) |
Refer To Pictures |
|
L1 Dimension (mm) |
Refer To Pictures |
|
Holding Torque(N.cm) (Oz In.) |
600 Oz. In. |
|
Control Wires |
|
|
Insulation Resistant |
100 MOhm Min 500V DC |
|
Insulation Strength |
50Hz 1Minute 500V Min |
|
Ambient Temperature |
-20°C~+50°C |
|
Temperature Rise |
110°C Max. |
|
|
|
|
|
|
These motors are very powerful considering there torque rating, and provide more than enough holding torque for light to medium grade CNC's.
These can also be used in robotics, and many other applications requiring a great deal of torque with 3.5A. These motors also feature 3.9 inductance rating so they hold their torque much better at higher IPM Speeds.
I encourage you to check my store to compliment these motors with a Gecko G540, shielded motor cables, and power supplies. I will offer the lowest combo pricing online period.
All my international orders are handled through eBay's Global Shipping Program as they offer us both the best protection against loss, and damages. Please review their policy for a shipping quote based on your specific location as they don't disclose it to me.
*These motors weigh in at over 3lbs. each by themselves*