SONY LMD-2451MT
+ Extron DVI 104 Tx/Rx
24-inch Full HD 3D LCD medical monitor. The LMD-2451MT combines Sony 3D professional technology with an advanced 24-inch LCD panel to display clear 3D pictures. Surgeons can also view images from multiple monitors whilst wearing light, comfortable polarized glasses. Practical features include a user memory function and chroma phase control, while ChromaTRU technology contributes to optimised image quality.
Pioneering 3D quality
The LMD-2451MT uses advanced panel micro polarizer filter technology to deliver clear, smooth, consistent pictures that are viewed with passive glasses.
Multiple 3D formats
The versatile LMD-2451MT accepts various sources of 3D signal, such as 3D on 3G, dual stream left and right, field sequential and side-by-side HD-SDI, as well as DVI-D line interleave (line by line) mode. The display can accept almost any signal ranging from SD to HD video, as well as PC signals via its DVI-D or HD15 connectors.
Sony unique colour matching technology ChromaTRU
The LMD-2451MT helps to ensure more accurate colour consistency by means of a series of calibrations. The panel is individually calibrated so that RGB co-ordinates are consistent. A further calibration helps maintain white balance at a uniform colour temperature throughout all grayscale levels.
High brightness and contrast through super-wide WUXGA
The display utilises a wide WUXGA (1920x1200) LCD panel that offers high brightness and contrast.
Natural gradation and accurate colour reproduction
In order to ensure images have a smooth, natural gradation, the LMD-2451MT uses an advanced 10-bit digital video signal processor.
Gamma curve selection
The LMD-2451MT offers users the choice of DICOM or CRT 2.2. as sometimes, the accuracy of images does require a different gamma curve.
Multiple display modes
A choice of different display modes includes picture-out-picture, side-by-side split screen, zooming, and viewing live video all help to view images simultaneously.
Mirror image
The surgeon’s assistant can view a mirror image of the surgeon’s own display, in order to assist with more convenient manoeuvering of the camera.
Protected controls
In such a sensitive environment, it is vital to prevent inadvertent operation from the control panel. The LMD-2451MT’s key-inhibit function helps to remove this risk.
Compliance with medical standards
This product is distributed to the US and EU as a medical device and satisfies product safety standards (e.g. IEC 60601-1). For more details, please contact your nearest Sony sales office or an authorized dealer.
Specifications
Picture Performance
Type
a-Si TFT Active Matrix LCD with an AR-coated protection panel
Resolution
1920 x 1200 pixels (WUXGA)
Effective picture size (H x W)
518.4 x 324.0 mm (20 1/2 x 12 7/8 inches)
Effective picture size (diagonal)
613.2 mm (24 1/4 inches)
Aspect
16:10
Colors
Approx. 16.7 million colors (8-bit)
2D Viewing angle
89°/89°/89°/89° (typical) (up/down/left/right contrast >10:1)
3D Viewing angle
50° at a viewing distance more than 300 mm, crosstalk less than 7% (typical)
Input
Composite
BNC (x1), 1.0 Vp-p ±3dB sync negative
Y/C
Mini DIN 4-pin (x1)
Y: 1.0 Vp-p ±3dB sync negative,
C: 0.286 Vp-p ±3dB (NTSC burst signal level),
0.3 Vp-p ±3dB (PAL burst signal level)
RGB, Component
BNC (x3)
RGB : 0.7 Vp-p ±3dB (sync on green, 0.3 Vp-p sync negative)
Component : 0.7 Vp-p ±3dB (75% chrominance standard color bar signal)
DVI-D
DVI-D (x1)
TMDS single link
HD15
D-sub 15-pin (x1),
RGB: 0.7 Vp-p sync positive (sync on green, 0.3 Vp-p sync negative)
Sync : Total level (polarity free, H/V separate sync)
Plug & Play function : corresponds to DDC2B
External sync
BNC (x1)
0.3 Vp-p to 4.0 Vp-p ±bipolarity ternary or negative polarity binary
Option slot
2 slots
Parallel remote
Modular connector 8-pin (x1) (pin-assignable)
Serial remote
D-sub 9-pin (RS-232C) (x1), RJ-45 modular connector (Ethernet) (x1) (10BASE-T/100BASE-TX)
DC in
DC 5V / 24V (output impedance 0.05 ohms or less)
Output
Composite
BNC (x1), loop-through, with 75 ohms automatic termination
Y/C
Mini DIN 4-pin (x1) loop-through, with 75 ohms automatic termination
RGB, Component
BNC (x3), loop-through, with 75 ohms automatic termination
External sync
BNC (x1), loop-through, with 75 ohms automatic termination
General
Power requirements
DC IN: 24 V 5.0 A, 5 V 0.030 A (supplied from AC adapter)
AC adapter (Sony, AC110MD)
AC IN: 100 V to 240 V, 50/60 Hz, 1.53 A to 0.58 A
DC OUT: 24 V 5.0 A, 5 V 0.060 A
Power consumption
Maximum: approx. 136 W (with 2 x BKM-229X)
Operating temperature
0°C to 35°C (32°F to 95°F)
Recommended
20°C to 30°C (68°F to 86°F)
Operating humidity
30% to 85% (no condensation)
Storage and transport temperature
-20°C to +60°C (-4°F to +140°F)
Storage and transport humidity
0% to 90% (no condensation)
Operating, storage, and transport pressure
700 hPa to 1060 hPa
Dimensions (W x H x D)
602.4 x 386.2 x 110 mm (23 3/4 x 15 1/4 x 4 3/8 inches) (including projections)
Supplied Accessories
Extron DVI 104 Tx/Rx
AC Adaptor (AC-110MD)
AC power cord
3D Eye Shield Kit (CFV-E30SK) • Frame • 3D shield
Instructions for Use of the 3D Eye Shield Kit
CD-ROM (including the Instructions for Use)