Instructions for use:
- Power ON/OFF: Long touch "O" key for 3 seconds
- Output pause / resume: Short touch "O" key to pause the output, and short touch it again to resume the output(the resume voltage is the working voltage before the pause).
- Adjust output voltage: Touch the "+" or"-" key to adjust output voltage. The voltage can be adjusted through button (+) and (-) respectively with the voltage of 0.1V on each touch.
- Working time: The working time can be accurate to seconds. When the power is turned off, the time will be cleared. When the output is paused, it will also stop counting.
Power: The LED display will show the remaining power. Fast charging through the matching fast-charging Type-C data cable can usually be fully charged about 3 hours.
Feature:
2400mAh Large Battery Capacity
- The real capacity of the vibe battery is 2400 mAh. After many tests, a fully charged battery can work for more than 10 hours at an output voltage of 8V, and the two batteries can be used for more than 20 hours in total.
- The battery can be fully charged about 3 hours with the Type-C fast charging cable. And the battery is equipped with a 10V jumpstart start function, even big mags can be pushed.
High-sensitivity Touch Buttons
- The battery of the vibe tattoo machine adopts high-sensitivity touch buttons, which changes the button method of the traditional wireless battery pen. It only needs to gently place your finger on the button.
- High-sensitivity touch buttons can be used even if you wear tattoo gloves or the machine is covered with a machine cover bag.
Multifunction LED Display
- The vibe cordless gun machine adopts LED digital display screen, which is equipped with various machine data. It displays the machine's working voltage, current, remaining power, Hertz and timer. These data can help tattoo artists to clearly know the working status of the machine and meet daily tattooing needs.
- The ambition vibe machine displays your machine speed in both Hertz & Volts. When you adjust the volt, the hertz will be changed too. Hertz allows you to know the current speed of your machine more precisely. The working voltage of the vibe machine is 4.5V-12V, the frequency of 4.5V working voltage is about 72 Hz, and the frequency of 12V is about 196 Hz. Its frequency will change with voltage regulation, adjust power by 0.1.
Brushless Motor
- The vibe wireless tattoo machine built-in a brushless motor and 4.0mm stainless steel stroke cam. The brushless motor greatly prolongs the service life of the machine, and is more powerful and quieter than the coreless motor.
- The 4.0 stainless steel stroke cam is not easy to wear and deform, it makes the machine have good balance between lines and shading, and perfect for demanding lining and color packing.
Please pay attention to the change of power at any time to prevent sudden power loss from affecting your tattooing work.
Tips: Our products are 100% brand new. There is a protective film on the screen. There may be a small amount of scratches during the production, packaging and transportation. Just tear off the protective film after receiving the machine.
2)Payment must be made within 5 days, Non-payment may result in an UPI (Unpaid item ) ,eBay will automatically close your account if you accumulate 4 UPI's total .
3)Please list your special request (color, packages, value of declaration, etc.) in the paypal notes section when you make payment .
2).We greatly appreciate your POSITIVE 
feedback and
Please do NOT leave negative feedback without asking for help.
3).Our aim is to provide Top Level Customer Service, normally so we will try our best to solve any problem.
4).Please DON’T leave negative or neutral feedback if you haven’t received item in 30 days, because we have mentioned the shipping time repeatedly.
Dear customer:
Please add my eBay shop to your "My Favorites" list.
Please come back soon and visit us again!
