All parcels will be posted to your PayPal shipment address so make sure your postal address is correct before paying.
NOTE# This Creader OBD2 scanner may NOT work if your ECU has been reflashed using Flash Tune Software & your OBD2 port is flashed closed, check with your tuner who uses Flash Tune software first to make sure that your OBD2 port has been flashed open before buying this product.
Works fine with Yamaha's standard factory ECU unflashed & engine ECU's reflashed using Woolich Software:
Scanner + Yamaha compatible adaptor connector, this tool is a code reader that can read engine only fault codes + delete them, it can read measuring blocks for sensor diagnosis on the below bikes listed, you no longer need to go to the dealer when the engine light comes on, you can plug in the scanner into the White 4 pin Yamaha OEM diagnostic plug under the seat check your connector before buying this scanner, read what the stored fault code number is then clear that fault code once the fault has been repaired.
This scanner can not adjust the bikes CO or AFR or reset the service reminder.
I have opened the scanner package for testing purposes, I test all scanners before shipping.
Use this scanner for:
Note this is a car scanner adapted for motorcycle use, the Fault codes P00000 need to written down & refereed to the bikes workshop manuals to know what the P number refers to, motorcycles are not listed on the fault memory directory.
Reading Codes
Trouble Code (DTCs) Shows the P00000 fault code number which you then look up this P code in the bikes workshop manual.
Erasing Codes & Reset for engine only
Turns off Check Engine Light , clears engine fault codes and resets fault codes after the faults have been fixed.
Measuring value block
Reads sensor inputs to the engine ECU
Support Language
English , French , Russian , Spanish ,German, Italian ,Portuguese
Scanner Works on the below list, if your bike is not on the list directly below check with me first for compatibility before buying.
R6 2017 - 2018 - 2019 2020 models with white 4 pin connector
R1 2017 2018 2019 with white 4 pin connector
MT10 + MT10SP: 2016 - 2017 - 2018 - 2019 2020 with white 4 pin connector
FZ10 : 2016 - 2017 - 2018 - 2018 -2019 2020 with white 4 pin connector
MT09 MT09SP: 2016 EU/Australia/NZ Only - 2017 - 2018 - 2019 2020 all countries with white 4 pin connector
FZ09: 2017 - 2018 - 2019 2020 with white 4 pin connector
Tracer, GT, 900, FJ09: 2018 2019 2020 with white 4 pin connector
XSR900: 2016 EU/Australia/NZ Only. 2017 - 2018 - 2019 2020 all countries with white 4 pin connector
FJR1300: 2016 - 2017 - 2018 with white 4 pin connector
MT07HO: 2017 - 2018 - 2019 2020 with white 4 pin connector
XSR 700 2016 2017 2018 2019 2020
MT03: 2018 - 2019 2020 with white 4 pin connector
T7 2019 2020 with white 4 pin connector
NOTE: This scanner does not work on MT/FZ/FJ models with Euro 3 emissions or K line diagnostic's, it only works on Euro4 emission ECU's with OBD2 diagnostic's in the list above.
Does not work on 2013 to 2016 FZ09
Does not work on 2013 to 2015 MT09
Does not work on 2015 2016 2017 Tracers 900 & FJ09's.
Does not work on any year R1 or R6, will be testing on the 2017 R1M, R1 & R6 soon.
Does not work on USA 2016 XSR900
Does not work on MT07 LAMS or standard models 2015 to 2019
Does not work on R6 models 1999 to 2016
NOTE# Please make sure you are a where of your countries import regulations, I the seller would have no idea on your countries rules & regulations on import duties or taxes when importing an item.