Package 1 Included:
Only 1 EV1527 Learning code Remote Control * 1pcs (Battery included);
Package 2 Included:
(Only 1 receiver) Mini Wireless RF Remote Control Light Switch Receiver module *1pcs (1527 Encoding );
Package 3 Included:
1 Pcs * Mini Wireless RF Remote Control Switch Receiver module ( 1527 Encoding )
1 Pcs * 1 Button RF 433Mhz Remote Transmitter (Battery included).
Attention Please:
Every parcel only get 1 pcs cross screwdriver as a free gift whatever how many you order.
Specifications Of The Remote Control: Operating frequency: 433.92MHz Power by 2Pcs 3V Coin Cell Button Battery (Battery included ), Material: PVC. Button: 1 button Size:59mm x 28mm x 8mm; Operating voltage: 6V ; Operating Current: 12mA Transmitting power: 10mw Modulation mode: ASK (AM). Encoding type: Learning. Transfers distance: 80m.
| |
Specification: Working voltage: DC 3.6V~24V Maximum load: 2A Static current: 3.6 mA ~ 5.5mA Working frequency: 433MHz Reception sensitivity: ≥ -107dBm Size: 25.5 mm x 13mm x 8mm (length × width × high) Mini size support coding format 1527 learning code Input: DC 3.6V ~ DC 24V Output: DC 3.6V ~ DC 24V Modulation mode:ASK (superheterodyne) Appearance size: 25.5mmx 13mm x 8mm (length × width × high) Number of stored remote controls: ≤ 15 Working mode: Momentary, Toggle, Latching Mode,Time delay (5s ,10s ,15s,20s ), Automatic energize when power on Learning style: Learning Button Working temperature: -20 degrees 80 degrees.
|
About Working mode:
Time delay mode :Push the remote control button , the relay connects , from when release the remote button , after 5s or 10s or 15s or 20s, the relay disconnect automatically.
Automatic energize when power on: when power supply, the relay connects.Push the learning key on the receiver forth time , the time dealy for 5 seconds .
Push the learning key on the receiver fifth time , the time delay for 10 seconds.
Push the learning key on the receiver sixth time , the time delay for 15 seconds .
Push the learning key on the receiver seventh time , the time delay for 20 seconds .The LED indicator will be on .Push the remote button , LED indicator flashes 3 times and then off, learning successfully .
6、Learning the code : (Automatic energize when power on)
Push the learning key on the receiver eight times , it comes into setting mode
Wait for a moment , the LED will be on , it comes into learning state .
Push the remote button,LED indicator on the receiver board will flash 3 times and then come off,
learning successfully .
NOTE: The system can store for 15 pcs of remotes , if the remote get more than 15 pcs , the initial remote control will be lost .