| Electrical Characteristics | ||||||||
| Capacitor Type | Fluid Impregnated | |||||||
| Dielectric System | Self-Healing Metallized Polypropylene | |||||||
| Impregnation Fluid | Non-PCB, non-toxic, Biodegradable, Class III Combustible Fluid | |||||||
| Capacitor Connection – 3 phase | Internal Delta Connection | |||||||
| Capacitance Tolerance | -0% to +15% | |||||||
| Discharge Device | Internal resistors reduce residual voltage to < 50 V within 1 minute | |||||||
| Over Current | ||||||||
| Standard | 135% x rated current continuous, includes harmonic currents | |||||||
| High Harmonic | 150% x rated current continuous, includes harmonic currents | |||||||
| Over Voltage | ||||||||
| Standard | 110% x rated voltage continuous | |||||||
| High Harmonic | 120% x rated voltage continuous | |||||||
| Total Losses | < 0.5 Watts / KVAR at 60 Hertz, 25°C | |||||||
| Design Service Life | 200,000 Hours Continuous Duty | |||||||
| Mechanical Characteristics | ||||||||
| Enclosure Type | Heavy gage welded steel construction | |||||||
| Finish | Light gray paint, ANSI #61, UL approved for outdoor usage | |||||||
| Mounting | Heavy gage brackets, mounting holes 2 x ½ x ⅝” slots | |||||||
| Terminals | ½”-13 brass studs - 160 in/lbs fasterning torque, 30 kV BIL bushing | |||||||
| Loss of KVAR feature | Optional | |||||||
| Environmental Characteristics | ||||||||
| Operating Temperature | -40°C to + 46°C, -40°F to + 115°F, with natural convection cooling | |||||||
| Storage Temperature | -40°C to + 85°C, -40°F to +185°F | |||||||
| Maximum Altitude | 2000 Meters above sea level | |||||||
| Humidity | 0 – 95% non-condensing | |||||||
| Standards | ||||||||
| UL 810 UL | NEMA CP-1 | |||||||
| C22.2 No. 190 Canadian Standards | IEC 831 | |||||||
| ANSI/IEEE 18 | ||||||||
| Certifications | ||||||||
| Recognized – CYTW2 | ||||||||
| cUL Recognized – CYTW8 | ||||||||