Detail
*Tamiya 20053 1/20 Tyrell P34 1977 Monaco GP (Model Car)
[About Tyrrell P34]
――The Tyrrell P34 was active in F1 in 1976, adopting the strange idea of a 6-wheeled vehicle.
――The following year, we welcomed First National City Bank as the main sponsor, changed the coloring, and adopted a full cowl with excellent aerodynamics.
――We participated in the drive of P. Depailler and R. Peterson, but this year a tire war broke out between two tire manufacturers.
――For Tyrell, who uses a dedicated front wheel, we were in a difficult situation that the development did not proceed.
――While I couldn't do what I expected, I continued to make efforts such as returning to the previous year's cowl at the Monaco GP and so on, and fought hard.
[About the model]
――A 1/20 scale assembly kit that reproduces the Monaco GP specifications that entered the race by returning to the half cowl among the Tyrell P34 that fought in the 1977 F1 Grand Prix.
--Overall length 201mm, overall width 101mm.
--Modeled by capturing the features of Monaco GP race cars such as rear seat cowl, front brake cooling duct, stabilizer, rear wing end plate, and tail light.
--The V8 Ford Cosworth DFV engine has a high density finish with the ignition cord wired.
-The gearbox and suspension are also precisely reproduced.
--With a driver doll.
--Slide marks are set for No. 3 R. Peterson and No. 4 P. Depailler.
* The photo shows the kit assembled and painted.
――The Tyrrell P34 was active in F1 in 1976, adopting the strange idea of a 6-wheeled vehicle.
――The following year, we welcomed First National City Bank as the main sponsor, changed the coloring, and adopted a full cowl with excellent aerodynamics.
――We participated in the drive of P. Depailler and R. Peterson, but this year a tire war broke out between two tire manufacturers.
――For Tyrell, who uses a dedicated front wheel, we were in a difficult situation that the development did not proceed.
――While I couldn't do what I expected, I continued to make efforts such as returning to the previous year's cowl at the Monaco GP and so on, and fought hard.
[About the model]
――A 1/20 scale assembly kit that reproduces the Monaco GP specifications that entered the race by returning to the half cowl among the Tyrell P34 that fought in the 1977 F1 Grand Prix.
--Overall length 201mm, overall width 101mm.
--Modeled by capturing the features of Monaco GP race cars such as rear seat cowl, front brake cooling duct, stabilizer, rear wing end plate, and tail light.
--The V8 Ford Cosworth DFV engine has a high density finish with the ignition cord wired.
-The gearbox and suspension are also precisely reproduced.
--With a driver doll.
--Slide marks are set for No. 3 R. Peterson and No. 4 P. Depailler.
* The photo shows the kit assembled and painted.
Item Size/Weight : 29.3 x 19.2 x 7.2 cm / 344g
Copyright©2018 DataCaciques
Detail
*Tamiya 20053 1/20 Tyrell P34 1977 Monaco GP (Model Car)
[About Tyrrell P34]
――The Tyrrell P34 was active in F1 in 1976, adopting the strange idea of a 6-wheeled vehicle.
――The following year, we welcomed First National City Bank as the main sponsor, changed the coloring, and adopted a full cowl with excellent aerodynamics.
――We participated in the drive of P. Depailler and R. Peterson, but this year a tire war broke out between two tire manufacturers.
――For Tyrell, who uses a dedicated front wheel, we were in a difficult situation that the development did not proceed.
――While I couldn't do what I expected, I continued to make efforts such as returning to the previous year's cowl at the Monaco GP and so on, and fought hard.
[About the model]
――A 1/20 scale assembly kit that reproduces the Monaco GP specifications that entered the race by returning to the half cowl among the Tyrell P34 that fought in the 1977 F1 Grand Prix.
--Overall length 201mm, overall width 101mm.
--Modeled by capturing the features of Monaco GP race cars such as rear seat cowl, front brake cooling duct, stabilizer, rear wing end plate, and tail light.
--The V8 Ford Cosworth DFV engine has a high density finish with the ignition cord wired.
-The gearbox and suspension are also precisely reproduced.
--With a driver doll.
--Slide marks are set for No. 3 R. Peterson and No. 4 P. Depailler.
* The photo shows the kit assembled and painted.
――The Tyrrell P34 was active in F1 in 1976, adopting the strange idea of a 6-wheeled vehicle.
――The following year, we welcomed First National City Bank as the main sponsor, changed the coloring, and adopted a full cowl with excellent aerodynamics.
――We participated in the drive of P. Depailler and R. Peterson, but this year a tire war broke out between two tire manufacturers.
――For Tyrell, who uses a dedicated front wheel, we were in a difficult situation that the development did not proceed.
――While I couldn't do what I expected, I continued to make efforts such as returning to the previous year's cowl at the Monaco GP and so on, and fought hard.
[About the model]
――A 1/20 scale assembly kit that reproduces the Monaco GP specifications that entered the race by returning to the half cowl among the Tyrell P34 that fought in the 1977 F1 Grand Prix.
--Overall length 201mm, overall width 101mm.
--Modeled by capturing the features of Monaco GP race cars such as rear seat cowl, front brake cooling duct, stabilizer, rear wing end plate, and tail light.
--The V8 Ford Cosworth DFV engine has a high density finish with the ignition cord wired.
-The gearbox and suspension are also precisely reproduced.
--With a driver doll.
--Slide marks are set for No. 3 R. Peterson and No. 4 P. Depailler.
* The photo shows the kit assembled and painted.
Item Size/Weight : 29.3 x 19.2 x 7.2 cm / 344g
After we received your payment, your item will be shipped out within 3-5 business day. Please note that our working days shall be from Monday to Friday, exclude Saturday, Sunday and Public Holidays.
Return
*We will refund only for faulty items.If you have chosen the wrong size we can exchange but postage for the both ways to be paid by purchaser.please contact us if you have any problems before leaving negative feedback.We bag your pardon that due to the high shipping cost exchange or return is not offered.We provide excellent customer service and believe that most problems,can resolved to the satisfaction of both parties please ask questions prior to purchase.
Contact us
Customer satisfaction is important to us and our feedback rating reflects it . If you have any questions before and after your purchase,Do not hesitate to contact us , we welcome you to email us, we strive to answer all questions and resolve any problems as quickly as possible.
Please leave us your positive feedback and 5-star rating if you are satisfied with our items and service. You will be greatly appreciated. If not quite satisfied, please do contact us before leaving the feedbacks. We will surely solve the problem for you satisfactorily. (100% communication, 100% refund, 100% replacement) Please do give us a chance to make things right before any negative or neutral feedback left
On Dec 15, 2022 at 22:25:41 PST, seller added the following information: