High-quality materials, environmentally friendly, exquisite craftsmanship, safe, reliable and durable, long service life, complete specifications, quick installation and simple use, and better cost performance.
Small size, High torque, High efficiency, Low noise, Stable performance. Reversible, supporting clockwise and anti-clockwise rotation. Permanent Magnet Motor, Planetary Geared Motor.
Full Metal Gearbox. Full metal gear material is used to make it more wear-resistant for longer life, high torsion resistance, fast heat dissipation, high precision, high compounding capacity.
The use of pure copper wire wound rotor is not easy to heat, and the service life is longer. Low resistance and high conductivity increase the torque of the motor.
"D" Profile Output Shaft, easier to install, less slippage, less time spent on installation.
The magnetic material adopts wet press magnet structure, the torque is greater than the traditional rubber magnetic strip torque, and the operation is smoother.
Reducer with ball bearing structure, low frictional resistance, low noise, long life, fast heat dissipation, high precision, high compounding capacity
Widely used in smart self-balancing two-wheeled vehicles, smart trolleys, smart home appliances, robots, camera booms, electric paper cutters, electric curtains, smart balance cars, smart manipulators, etc.
Optional Accessories: None (Single Motor) or Motor with a Bracket
Notice:
- The lower speed, the larger torque.
- Different reducer lengths for different reduction ratios.
- Motor Model: 36GP-555
- Voltage: DC 12V (1225#) ; DC 12V (1260#) ; DC 24V (2450#) ; DC 24V (24120#)
- Motor Diameter: 36mm
- Motor Length: (Length dimensions vary according to parameters)
- "D" Profile Shaft
- Shaft Diameter: 8mm
- Shaft Length: 20mm
- Reduction Ratio: 1:5.2 1:19 1:27 1:51 1:100 1:139 1:264 1:515
| Operating Voltage: DC 12V (1225#) / Maximum Output Power: 3W | ||||||||
| Reduction Ratio | 1:5.2 | 1:19 | 1:27 | 1:51 | 1:100 | 1:139 | 1:264 | 1:515 |
| No-load Current (mA) | ≤220 | ≤220 | ≤220 | ≤220 | ≤220 | ≤220 | ≤220 | ≤220 |
| No-load Speed (RPM) | 480 | 130 | 92 | 49 | 25 | 18 | 9.5 | 4.8 |
| Rated Torque (Kg.cm) | 1.0 | 1.5 | 2.5 | 5.0 | 10.0 | 15.0 | 30.0 | 50.0 |
| Rated Speed (RPM) | 240 | 70 | 75 | 40 | 20 | 14 | 7.5 | 4 |
| Rated Current (A) | ≤1.0 | ≤1.0 | ≤1.0 | ≤1.0 | ≤1.0 | ≤1.0 | ≤1.0 | ≤1.0 |
| Locked-rotor Torque (Kg.cm) | ≥2 | ≥13 | ≥7 | ≥11 | ≥22 | ≥35 | ≥50 | ≥60 |
| Locked-rotor Current (A) | ≤3 | ≤3 | ≤3 | ≤3 | ≤3 | ≤3 | ≤3 | ≤3 |
| Operating Voltage: DC 12V (1260#) / Maximum Output Power: 30W | ||||||||
| Reduction Ratio | 1:5.2 | 1:19 | 1:27 | 1:51 | 1:100 | 1:139 | 1:264 | 1:515 |
| No-load Current (mA) | ≤400 | ≤400 | ≤400 | ≤400 | ≤400 | ≤400 | ≤400 | ≤400 |
| No-load Speed (RPM) | 1150 | 315 | 220 | 115 | 60 | 43 | 23 | 11.5 |
| Rated Torque (Kg.cm) | 3 | 7 | 10 | 20 | 40 | 50 | 50 | 50 |
| Rated Speed (RPM) | 880 | 240 | 165 | 90 | 45 | 32 | 20 | 10.5 |
| Rated Current (A) | ≤2.0 | ≤2.0 | ≤2.0 | ≤2.0 | ≤2.0 | ≤2.0 | ≤1.7 | ≤1.5 |
| Locked-rotor Torque (Kg.cm) | ≥7 | ≥25 | ≥30 | ≥50 | Cannot exceed 60Kg.cm | |||
| Locked-rotor Current (A) | ≤1.0 | ≤1.0 | ≤1.0 | ≤1.0 | ≤1.0 | ≤1.0 | ≤1.0 | ≤1.0 |
| Operating Voltage: DC 24V (2450#) / Maximum Output Power: 15W | ||||||||
| Reduction Ratio | 1:5.2 | 1:19 | 1:27 | 1:51 | 1:100 | 1:139 | 1:264 | 1:515 |
| No-load Current (mA) | ≤230 | ≤230 | ≤230 | ≤230 | ≤230 | ≤230 | ≤230 | ≤230 |
| No-load Speed (RPM) | 960 | 260 | 185 | 98 | 50 | 36 | 19 | 9.7 |
| Rated Torque (Kg.cm) | 2 | 5 | 5 | 10 | 20 | 30 | 50 | 50 |
| Rated Speed (RPM) | 480 | 165 | 150 | 80 | 40 | 28 | 15 | 8 |
| Rated Current (A) | ≤2.8 | ≤2.0 | ≤1.5 | ≤1.5 | ≤1.5 | ≤1.5 | ≤1.3 | ≤1.2 |
| Locked-rotor Torque (Kg.cm) | ≥4.5 | ≥13 | ≥15 | ≥22 | ≥45 | Cannot exceed 60Kg.cm | ||
| Locked-rotor Current (A) | ≤6.5 | ≤6.5 | ≤6.5 | ≤6.5 | ≤6.5 | ≤6.5 | ≤6.5 | ≤6.5 |
| Planetary Drive Stages | 1 Stages | 2 Stages | 3 Stages | 4 Stages | ||||
| Reducer Length (mm) | 26.5 | 34.5 | 42.5 | 50.5 | ||||
| Operating Voltage: DC 24V (24120#) / Maximum Output Power: 90W | ||||||||
| Reduction Ratio | 1:5.2 | 1:19 | 1:27 | 1:51 | 1:100 | 1:139 | 1:264 | 1:515 |
| No-load Current (mA) | ≤500 | ≤500 | ≤500 | ≤500 | ≤500 | ≤500 | ≤500 | ≤500 |
| No-load Speed (RPM) | 2300 | 630 | 440 | 235 | 120 | 90 | 45 | 23 |
| Rated Torque (Kg.cm) | 3 | 14 | 21 | 35 | 50 | 50 | 50 | 50 |
| Rated Speed (RPM) | 1820 | 490 | 330 | 190 | 90 | 60 | 30 | 18 |
| Rated Current (A) | ≤2.6 | ≤2.6 | ≤2.6 | ≤2.6 | ≤2.6 | ≤2.6 | ≤2.6 | ≤2.6 |
| Locked-rotor Torque (Kg.cm) | ≥14 | ≥50 | Cannot exceed 60Kg.cm | |||||
| Locked-rotor Current (A) | ≤21 | ≤21 | ≤21 | ≤21 | ≤21 | ≤21 | ≤21 | ≤21 |
● Exact dimensions can also be viewed in the photo gallery.
