AUTOPHIX, as one of the industry's leading manufacturers and suppliers of professional automotive diagnostic tools, equipment and accessories, has been deeply engaged in this field for over 20 years and continues to innovate in order to provide better products to our customers.

In the past year we found that 95% of products on the market only have basic OBD function or battery detection function, 80% of customers need both functions, but buying both products is a waste of money, so we decided to develop a great product that has both functions.

We chose to optimize on the basis of OM129 code reader, and finally, with the efforts of 20+ senior engineers, we launched this most cost-effective product - "OM129 Pro". This 2022 newest car code reader is NOT JUST an OBD2 scanner, BUT ALSO a professional car battery tester!!!

Introduce：

🥇【2022 Fully Upgraded 2 in 1 OBD2 Scanner】
Based on OM129 code reader, we invited 100 top designers in the industry to develop this more comprehensive and powerful car diagnostic tool " OM129 Pro ". It combines the functions of a code reader and a battery tester into one, so it is not only a basic vehicle code reader with full OBDII functions, but also a 6V and 12V battery tester.

🏆【2022 Most Professional Battery Test Functions】
This car code reader features with 3 types of battery test functions.
🔋Battery health test will determine if the battery is in good operating condition.
🚙Cranking test will determine if the electrical system has enough power to start the engine.
🧲Check to see if the charging current, rectifier diode, and generator are all working properly.

🔋【2022 Most Universal 6V/12V Car Battery Tester】
This battery load tester works on all 6V and12V lead-acid batteries from 100 to 2000CCA, such as regular flooded, AGM flat plate, AGM spiral, GEL batteries and EFB batteries. The battery tester automotive provides numerous understandable data that helps to analyze, like volts, measured value, SOC, SOH and RES. The test results based on CCA, EN, SAE, CA, DIN,JIS, IEC, GB, MCA, BCI standard.

🚗【Full OBD2 Function】
The car computer code reader not only read & clear the trouble codes that cause emission problems with your car, turns off the MIL, but perform I/M Readiness Test & EVAP System Test, show live data stream, and identify the vehicle Info (VIN, CIN, CVN). Most importantly, the built-in DTC Lookup library will help you find the related code definitions, so you can determine if your car needs repair, save your time & money.

👍【High Accuracy & Live Data Stream in Graph】
This OBD2 scanner is equipped with the most advanced industrial chip in 2022, which makes its scanning speed 3X faster than ordinary diagnostic scanner, and show you the fault causes and solutions in seconds. Most surprisingly, its diagnostic accuracy can reach 100%. Besides, the check engine code reader shows live vehicle sensors data in text and graph formats, so that you can view them more intuitively.

👉【One-Click I/M Readiness & Unique "i" Button】
We set 2 hot keys on the keyboard that will help you perform these functions quickly. I/M key can get emission readiness status, trouble codes with just one single click, to check if all monitors are OK or N/A. "i" Button can read more about the codes info, and show you the cause this fault codes occured and accurate repair advice instead of a bunch of technical terms you don't understand.

👍【Broad Vehicle Compatibility】
The car battery tester supports the batteries of cars, pickup, ATVs, SUVs, Golf Carts, Motorcycle, etc. When it works as an OBDII code reader, it works on most vehicles sold in the USA with the model year of 1996 or newer, 2002 EU-Based and 2008 Asian-Based cars or newer. Built-in 16 languages makes it more practical. 2.8-inch TFT color screen & 2.5 feet long cable make your operation more convenient.

2022 Most Professional Car Diagnostic Tool, We Launched!

OM129 Pro Car Code Reader Powerful Features:

• 2 in 1 Most Comprehensive: Not only perform full OBDII functions, but also features 3 powerful battery test functions.
• Full OBD2 Modes Test: Check most emission-related car issues, including read code & erase code, I/M readiness, graphic live stream, freeze frame data, O2 sensor test, on-board monitor test, retrieve vehicle information, component test, turn off the CEL, help you pass the smog test.
• Patented 2 Hot Keys: To make emission readiness test more fastly and easily, we set a one-click readiness key; "i" Button can read more about the codes info, and show you the cause this fault codes occured and accurate repair advice.
• Professional Battery Test: Features with 3 types of battery test functions --- battery health test, cranking system test and charging system test, comprehensively judge the health status of the battery from the three test results
• Most Advanced Industrial Chip: Equipped with the most advanced industrail chip in 2022, so the code reader has super fast diagnostic speed. Meanwhile, it brings you 100% accurate testing result.
• Enhanced Data Stream: Shows all live vehicle sensors data in text & graph formats, so that you can view them more intuitively.
• Multilingual languages: Support 16 different languages, including English, French, German, Spanish, Dutch, etc.
• Wide Vehicle Covarage: Work on most vehicles sold in the USA with the model year of 1996 or newer, 2002 EU-Based and 2008 Asian-Based cars or newer.

AUTOPHIX OM129 Pro, the Best Doctor for Your Car Battery

• Wide Battery Coverage: Works for all 6V and 12V lead acid batteries rated from 100 to 2000CCA, including Regular Flooded, AGM Flat Plate, AGM Spiral, GEL and EFB.
• Extensive Rating System Coverage: CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE, and GB.
• Broad Vehicle Application: Cars, SUVs, Pickup, ATV, Golf Carts, Motorcycles, etc.
• Battery Health Test Result: SOH (state of health), SOC (state of charge), CCA value, voltage, internal resistance, etc.
• Cranking/Starting System Test: predict if the battery will fail to crank/start a vehicle.
• Charging System Test: Helps to determine if the output voltage of the generator, the rectifier diode, and the charging current is normal.
• Convenient for Testing: Support for in-vehicle and out-of-vehicle testing.
• 100% Accurate Data: Provide you with accurate data(can reach 99.99%) and accurately analyze battery health to give concise advide in seconds(Good, Recharge, Replace).

3 Types of Battery Test Functions Make It More Professional

BATTERY HEALTH TEST GOOD BATTERY: The battery is in good condition. GOOD-RECHARGE: The battery is in good condition but low current. Fully charge the battery and return it to service. CHARGE & RETEST: Fully charge the battery and retest. Failure to fully charge the battery before testing may result in inaccurate results. If you still get CHARGE & RETEST message after you fully charge the battery, replace it. REPLACE BATTERY: The battery is almost dead or the connection between the battery and battery cable is poor. Replace the battery and retest; or disconnect the battery cables and retest the battery using the out-of-vehicle test before replacing it. BAD CELL-REPLACE: The battery may be damaged such as broken cell or short circuit. Replace the battery and retest.	CRANKING SYSTEM TEST Perform high-frequency real-time monitoring of the voltage during the startup process, and roughly judge whether the startup process is normal through the change of the voltage during the startup process. Generally, whether the process is normal is judged by the voltage before starting, the voltage at the starting point, the voltage after starting (charging), and the voltage fluctuation during the starting process.	CHARGING SYSTEM TEST NO PROBLEMS: System is showing normal output from the alternator. NO OUTPUT: No alternator output detected. Check all connections to and from the alternator, especially the connection to the battery. If the connection is loose or heavily corroded, clean or replace the cable and retest. If the belts and connections are in good working condition, replace the alternator. LOW OUTPUT: Alternator not providing sufficient to power the system's electrical loads and charge the battery. Check the belts to ensure the alternator is rotating with the engine running. Replace broken or slipping belts and retest. HIGH OUTPUT: Alternator voltage output exceeds the normal limits. Make sure there are no loose connections and the ground connection is normal. If there are no connection problems, replace the regulator. Most alternators have a built-in regulator that requires replacing the alternator. In older vehicles that use external voltage regulators, you may need to replace only the voltage regulator.

 

2022 Newest OBD2 Scanner with Full OBDII Test Modes

• Read Codes/ Erase Codes: Locate which section of the emission control system has malfunctioned. erases the codes from the vehicle after certain repairs.
• I/M Readiness: Checks if the various emissions-related systems are ready for the Vehicle Inspection and Maintenance testing or if the repairs has been performed correctly.
• Data Stream: Displays the dynamic data of the data stream items in graphical way, Simpler and easier to understand.
• View Freeze Frame: Records the certain vehicle conditions when an emission-related fault occurs.
• O2 Sensor Test: Monitors and tests operation of the O2 sensors to identify problems that can affect fuel efficiency and vehicle emissions.
• On-Board Monitor Test: Retrieves test results for emission-related powertrain components and systems that are not continuously monitored.
• EVAP System Test: Initiates a leak test for the vehicle’s EVAP system.
• DTC LOOKUP: Enables you to view the detailed definition of the retrieved DTC easily, you only need press one-click button “I”.
• Vehicle Information: Retrieve vehicle’s Vehicle identification number, calibration ID, and calibration verification number.
• Data Record & Review: The OM129 Pro car code reader not only records the live data stream (PIDs), but also freeze data and trouble codes to helps you diagnose the root cause of engine failure.
• Print Data: If you are unable to determine the problem, you can print out the diagnostic data and send the data to your mechanic for help.

TURN OFF MIL The code readers & scan tools can find out the reason which causes the Check Engine Light on quickly and accurately, and help DIYers or mechanics locate the issue or even fix it. Just clear codes after certain repairs and the light will be turned off automatically.	DTC LOOKUP OM129 Pro car battery tester has a built-in OBD-II DTC look-up library, just clicking "i" button directly and you will see the related definition of trouble codes and accurate repair advice, saving time for you to looking for the meaning of DTC on the internet.	VEHICLE INFORMATION This scan tool can identify your vehicle and pull its information of VIN, CIN and CVN. These data will let you know where the vehicle is manufactured, help find out the auto part that fits, or track such things as previous owner(s), prior accidents / damages, registrations, insurance coverage etc.