Description
Solar Tracker Controller Solar Tracking Supporting Automatic and Manual Working Modes
Description:
This controller is a dual-axis or single-axis solar tracking controller. Its light sensor adopts the patented pyramid four-quadrant structure design. The signal of the light sensor is analyzed by the microcontroller in the controller, and the corresponding motor platform is controlled by the relay on the circuit board to track the sun. At the same time it has functions such as night homing, manual mode and anti-shake.
Before shipment, we have adjusted the controller with high precision, no complicated parameter setting is required. Ready to use.
Tracking frequency: 1 minute tracking for 20 seconds, low power consumption and anti-shake
Solar tracker system consists of the following parts:
1. Main controller
Automatic homing at night: east and flat
Installation hole size: left and right 135MM/5.3", top and bottom 52MM/2", hole diameter 7MM/0.3". It adopts IP65 waterproof shell and is equipped with aviation plug. Block terminals are used for wiring.
2. Light sensor
The light sensor adopts the patented pyramid four-quadrant structure design to generate signals in four directions. Connect it to the main controller via cable and aviation plug. Equipped with a glass cover, it can protect against rain and dust. High light transmittance, no yellowing. It has a life span of 20 years. It comes with a 2m/6.6ft cable by default.
3. Rain sensor (optional)
4. Wind sensor (optional)
5. 220V AC controller (optional)
1. Relay 10A
2. Tilt motor
3. Horizontal motor
4. Power supply 12-24V or customized 220V
5. Button
6. MCU
7. Region switch
8. Aviation plug
9. Manual mode and automatic mode switching
10. Sunlight detection
11. West limit
12. East limit
13. North limit
14. South limit
15. Indicators
Attention: The limit switch adopts the normally closed type
Installation Method:
1. The light sensor is installed in the position where the platform runs with the sun. It is recommended to install the light sensor in the highest position of the straight bracket. The light sensor has an arrow label. When the system is tilted, the direction of the arrow is as shown in the figure.
2. The main controller is installed near the tracking system to ensure that the controller is protected from rain and sun exposure. No complicated parameter settings are required. Ready to use.
Description:
This controller is a dual-axis or single-axis solar tracking controller. Its light sensor adopts the patented pyramid four-quadrant structure design. The signal of the light sensor is analyzed by the microcontroller in the controller, and the corresponding motor platform is controlled by the relay on the circuit board to track the sun. At the same time it has functions such as night homing, manual mode and anti-shake.
Before shipment, we have adjusted the controller with high precision, no complicated parameter setting is required. Ready to use.
Tracking frequency: 1 minute tracking for 20 seconds, low power consumption and anti-shake
Solar tracker system consists of the following parts:
1. Main controller
Automatic homing at night: east and flat
Installation hole size: left and right 135MM/5.3", top and bottom 52MM/2", hole diameter 7MM/0.3". It adopts IP65 waterproof shell and is equipped with aviation plug. Block terminals are used for wiring.
2. Light sensor
The light sensor adopts the patented pyramid four-quadrant structure design to generate signals in four directions. Connect it to the main controller via cable and aviation plug. Equipped with a glass cover, it can protect against rain and dust. High light transmittance, no yellowing. It has a life span of 20 years. It comes with a 2m/6.6ft cable by default.
3. Rain sensor (optional)
4. Wind sensor (optional)
5. 220V AC controller (optional)
1. Relay 10A
2. Tilt motor
3. Horizontal motor
4. Power supply 12-24V or customized 220V
5. Button
6. MCU
7. Region switch
8. Aviation plug
9. Manual mode and automatic mode switching
10. Sunlight detection
11. West limit
12. East limit
13. North limit
14. South limit
15. Indicators
Attention: The limit switch adopts the normally closed type
Installation Method:
1. The light sensor is installed in the position where the platform runs with the sun. It is recommended to install the light sensor in the highest position of the straight bracket. The light sensor has an arrow label. When the system is tilted, the direction of the arrow is as shown in the figure.
2. The main controller is installed near the tracking system to ensure that the controller is protected from rain and sun exposure. No complicated parameter settings are required. Ready to use.
Low power consumption of the system: 0.26W
Package Included:
- 1 x Main Controller
- 1 x Light Sensor with Glass Shell
- 1 x 2M/6.6FT Cable
Payment Terms
1.We accept PayPal only.
2.All major credit cards are accepted through secure payment processor PayPal.
3.Payment must be received within 7 business days of auction closing.
4.We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
2.All major credit cards are accepted through secure payment processor PayPal.
3.Payment must be received within 7 business days of auction closing.
4.We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
Shipping Terms
- For remote regions, we will charge your extra shipping costs. Usually it cost about 35USD-50USD. We will contact you after your payment. Thanks for your understanding.
Return Terms
1. If you receive defective item, please kindly notify us within 14 days. We will guide you the returning instruction for replacement or refund.
2. If you purchased in improper condition, please NOTE that the sipping and handling fee will not be refund, all return shipping fee should paid by the buyer unless item DOA.
3. We reserve the right to refuse any returns for objective reasons.
2. If you purchased in improper condition, please NOTE that the sipping and handling fee will not be refund, all return shipping fee should paid by the buyer unless item DOA.
3. We reserve the right to refuse any returns for objective reasons.
Custom Duties & Taxes
1. Import duties, taxes, and charges are not included in the item price or postage cost. These charges are the buyer's responsibility.
2. Avoiding some unnecessary trouble, please check with your country's customs office to inform us what we should declare its value before shipping.
2. Avoiding some unnecessary trouble, please check with your country's customs office to inform us what we should declare its value before shipping.
Feedback
1. If you are dissatisfied for any reason, please don't be quick to leave us neutral or negative feedback. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.
2. If you are satisfied with the product you received, please kindly leave us a positive feedback and 5 star DSR. If there is any problem of your order, please feel free to contact us firstly, we are responsible and credible seller, will follow it for you asap.
2. If you are satisfied with the product you received, please kindly leave us a positive feedback and 5 star DSR. If there is any problem of your order, please feel free to contact us firstly, we are responsible and credible seller, will follow it for you asap.