|
AZ688-2 Wireless Curing Light Descriptions:
Wireless LED Curing Light 2000mw/cm² Lamp Test Meter Optical Fiber
Because of the Built-in battery of this product and the strict customs,
Please be more familiar with local customs and the circumstances before buying.
Thanks for your understanding!!!
The new brand high quality of curing light has main advantages of others as follows:
1. Excellent quality with competitive price
2. Quick delivery and best service
3. Service tools for dental and easy to maintain and recharge conveniently
4. Large capacity Li-battery can be used for a long one with full charging.
5. Plenty of fiber rods with very reasonable price on sale for you replacement
6. Composes of high power LED, qualified fiber rod.
7. Noiseless; No libration; Generate little heat when working.
8. Imported high power LED and four chips inside.
1. Blue-ray output wavelength:430-485nm.
2. Gradually bright, shiny,bright-wide, the work of three models to choose.
3. Three gear output timing:5s 10s 15s 20s 25s 30s 35s 40s
4. Blue-ray illumination: 5W≥18
5.The effect of curing time: 6s: 2-3mm.
6. Reliable structure and easy operation.
Technical Specifications:
Wavelength: 380-515nm2
Power density: 99-999mw/cm
Only for light probe with a circular emission window: 08-12mm
Measuring accuracy: +/-20%
Adjustable light intensity: 2000mw/cm2
Operating conditions:
Temperature :+10℃to +40℃
Relative humidity: 30% to 75%
Ambient pressure: 700hpa to 1060hpa
Technical parameters:
Output power-----------5w
Size ----------------------diameter 270*208*118mm
Weight-------------------720g
Working voltage--------100-240V AC, 50-60HZ
Packing List:
Main engine of light-curing Device------1 set
Optical Fiber--------------------------------1 piece
Battery----------------------------------------1 piece
Battery Charge Seat-------------------------1 set
Shade Board ---------------------------------1 piece
Instruction Booklet -------------------------1 piece
YS-C Curing Light Features
NAME：LED curing light
MODEl：YS-C
This high power 2700mw/c㎡ LED Curing Light has a humanity intelligent chip with a high intensity
LED light and Li-on rechargeable battery.
This device can cure all the dental resin known in the market nowadays; with a performance level far
superior than the halogen curing light's, it has 3 different working modes and it can solidify 4-5mm
deepness in a few seconds.
Benefits：
1)Very convenient to operate.
2)Small size,cordless and light weighted.
3)No dazzling strong light which allows you to aim the light to the exact position and improve the effectiveness of the treatment.
4)No vibration.
5)Noiseless operation.
6)High power rechargeable battery.
7)High powerful light intensity with a maximum reach of 2700MW/cm2.
8)3 different working time modes,exposure time for optional curing:8s/6s/4s.
9) You can select the correct mode according to the different types of material you wish to cure,their speed of reaction,and the clinical protocol you are following.
Best Quality Materials:
* Mono-fibered glass light guides for various applications.
* Anodized aluminum handpiece.
* Latest generation of CMS electronics.
* Very high-quality single L.E.D.
* Li-lon battery with no memory effect
Design and Ergonomics:
* Silent and hygienic, no fan.
* Round surfaces allow for easy and comfortable manipulation.
* Compact, lightweight and well-balanced light guide rotates through 360°.
* Base-charger can be turned in all directions and low battery warning.
* Can be used anywhere in the world. The voltage input is 110V-240V and we will provide you
with the correct according to the shipping destination.
Specifications:
- Blue Light Intensity: 2700mw/c㎡
- Rechargeable Li-ion battery
- Spectrum Range: 420nm- 480nm
- Power : AC110-230V / 50-60Hz
- Time option:8s/6s/4s
- Weight: 0.65kg
-Full Metal shell
Package Includes:
1 LED Curing Light Device
1 High Capacity Rechargeable Battery
1 Charger
1 Charger Socket
X2 Curing Light Feature:
Technical Parameters:
Light Source:Broad Band LED;
Wavelength Range:385 - 515 nm;
Light Intensity:> 2300mW / cm²;
Battery:Lithium-ion battery (total running time when the battery is fully charged: at least 80 minutes);
Power Input Power:AC 100-240V 50 / 60Hz;
Charging time: about 45 minutes;
Size:Handle:Φ20 mm × 240 mm; Charging stand: Φ63 mm × 30 mm (all of the above are the largest size)
Weight: Handle: 96 grams; Charging seat: 99 grams;
Operating ambient temperature: + 10℃ - + 40℃(+ 50 °F - + 70°F);
Operating relative humidity: 30% - 75%;
Operating environment pressure:700hPa - 1060hPa;
Package Contents:
1 × host handle;
1 × charging base;
1 × power ;
1 × user manual.
Operation and function description:
The entire handle is only one button, light built-in button.
1. For the first time, charge the light curing handle first. the USB cable of the charger into the USB port of the power ,the power into the power socket, and finally
Put the handle on the charging stand; or, insert the USB cable of the charging stand into the USB port of the computer, and then put the handle on the charging stand. Charging instructions are as follows:
| Emerald Flashing | Battery charging;
| Emerald green light | battery fully charged; handle removed the charging seat, the restoration of the previous working mode.
2. Working mode selection, by pressing the button for 2 seconds to release to switch the working mode.
| Blinking Blue | Progressive mode, working time 10 seconds, light intensity 0-5 seconds from 0-1200mW / cm², 5-10 seconds 1200mW / cm².
| Solid blue | Fast mode, working time 3 seconds, light intensity 2300mW / cm ²
3. Turn the light curing lamp on and off, press the button briefly.
4. Switch machine, in standby mode, press the button a short time to open the instrument; stop any operation for 60 seconds, into the ultra-low power standby.
WOODPECKER F*LED-B Curing Light Feature:
Feature:
Model:LED.B
Wireless
Long
standby time
Working
more efficiently
Function Keys:
ON/OFF
button：
1.Turn
on or turn off the LED blue-ray output
2.Can
make the machine run
Time
setting: 5s, 10s, 15s, 20s,25s,30s,35s,40s
Technical:
Changer
input: AC 110V—240V50—60Hz
The
changer output: DC5V 1A
Lithium
battery voltage: DC4.2V
Lithium
battery capacity:2200mAh
Output
optical wavelength:420-480nm
Output
light intensity:1200—1500mw/cm2
Package:
1
X Curing light
1
X High capacitance rechargeable battery
1
X Charger
1
X Charger socket
General Introduction:
This
curing light has the advantages of adjustable working time, visible working
time and high curing efficiency. When the curing light is charging, the charger
socket can display the charging status. (Charging: the indicator light is on,
Charging over: the indicator light is off. The curing light is removed from the
charging socket: Indicator Light begins to flash). When this machine is
working, every 5 seconds the buzzer will make a sound of “di” to remind you, at
the same time, the screen displays the remaining work time. Nonworking time,
this machine can automatic shutdown without any operation in 120 seconds to
save electric power. With this machine off, press any key to turn on the curing
light
Cv -gun 1 Sec White
Introduction:
1.Technical specifications：
1.1Dimensions: 25mm×25mm×240mm
1.2 Net weight: 280g
1.3 Power source
1.3.1 Power supply: rechargeable Lithium battery
1.3.2 Battery mode: ICR 18490
1.3.3 Battery voltage and capacity: 3.7V/ 1400mAh,Battery has protection against Over-voltage, over-current and short circuit.
1.3.4 Power Input: 100V to 240V, 50Hz/60 Hz Input Power: 10VA Power Output: DC5V/1A
1.4 Light source:
1.4.1 5W high power blue light LED
1.4.2 Checking method: the LED light is fine when the light is on during operating correctly.
1.4.3 The wave length of this product can match with the clinical dental resin solidification, such as 3M, Dentspl etc.
1.4.4 Wave length: 385nm-515nm
1.5 Light intensity: 1000 mW/c㎡~2300mW/c㎡
2. Operation：
2.1 Press the mode button. Following two modes are available.
2.1.1 TURBO Mode: screen shows P1, Press the time button to select of time which could be 1 and 3 seconds.Its output light intensity is about 1800 mW/c㎡-2300mW/cm2
2.1.2 NORMAL Mode: screen shows P2, Press the time button to select of time which could be 5,10 ,15and 20 seconds.Its output light intensity is about 1000 mW/c㎡-1200 mW/c㎡
2.2 During the operation, put the disposable sleeve on the top of the main unit, aim the top at the correct position, press the ON/OFF button and the main unit will produce "Bi" sound, the curing light radiates blue light and starts working according to the set modes. Meanwhile, it starts counting down and will produce tone at every 5 seconds, it stops working when counting down to "0".
2.3 During operation, the blue light can be stopped by press the power button at any time.
2.4 After a working cycle, operator can press the ON/OFF switch to start another working cycle. Stop operating if the equipment began to heat obviously, do not restart until the equipment cool down. Suggest continues working cycle less than 10 times.
2.5 Low power detective circuit is fixed inside of the main unit, when low power is detected, the display screen of main unit will wink, please charge in time.
2.6 When the battery needs to be charged, connect the of the into the AC100V~240V power supply. Then connect the output of the to the DC 5.0V input of the pedestal, and then the logo turn to blue. Put the main unit to the charging point of the pedestal, the display screen turn to scrolling display, and the curing lights starts charging.
2.7 After operating, take off the disposable sleeve and throw away, forbidden to reuse.
2.8 This equipment will turn off automatically if don't any action within 2 minutes, turn it on by press any button.
2.9 The depth of solidification of composite is no less than 2mm per 1 second.
FDA Statement
The
sale of this item may be subject to regulation by the U.S. Food and
Drug Administration and state and local regulatory agencies. If so, you
can bid on this item only if you are an authorized purchaser. If the
item is subject to FDA regulation, I will verify your status as an
authorized purchaser of this item before shipping of the item.
Seller name:Dentistworld
City State: SHENZHEN,China
Telephone number:0755-69985450
|
We accept PayPal Only! All payments must be made within 7 days after the auction ends. Non-paying bidders will be reported to eBay. Please don't buy an item if you can't/won't pay for it.
