Feature:
1. Reliable Work: All the internal components have adopted SMD design, which greatly increases the stability of the VFD.
2. Simple in Use: Clear operation panel together with digital display allows for great viewing and convenient control.
3. Quick Cooling: The extra large heatsink is also equipped with a low noise cooling fan, ensuring quick heat dissipation.
4. Good Material: Made from flame retardant ABS material, this variable frequency drive is very against impact.
5. Safer Working: Premium mainboard enables good protection and high safety for 3 phase 380-440V input and 0-440V output.
Specification:
Item Type: Variable Frequency Drive
Material: ABS
Storage Temperature: -25℃~+55℃
Input Voltage: 3 phase 380-440V AC.
Output Voltage: 3 phase 0-440V AC.
Package List:
1 x Variable Frequency Drive
1 x User Manual
Note:
1. Before wiring, please confirm whether the input power is in power off state.
2. For wiring work, please Ask professional electrical engineers to do it..
3. The grounding terminal must be grounded.
4. After the emergency stop circuit wiring is completed, be sure to check whether the action is valid.
5. Do not connect the output wire of the inverter with the shell, and do not short circuit the output wire.
6. Please confirm whether the voltage of the AC main circuit power supply is consistent with the rated voltage of the inverter.
7. Do not perform withstand voltage test on the inverter.
8. Please connect the braking resistor according to the wiring diagram.
9. Do not connect the power cord to the output U, V, W terminals.
10. Do not connect the contactor to the output circuit.
11. Be sure to install the protective cover before powering on. When removing the cover, be sure to disconnect the power.
12. The inverter that selects the reset and retry function should not be close to the mechanical equipment, since it will restart suddenly when the alarm stops.
13. After confirming that the running is cut off, the alarm can be reset. If the alarm is reset in the state of running , the inverter may start suddenly.
14. Do not touch the terminals of the inverter since there is high voltage on the terminals, which is very dangerous.
15. During power on, do not change wiring and disassemble terminal.
16. Cut off the main circuit power before carry out inspection and maintenance.
17. Do not modify the inverter without authorization.
18.Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.
