The 2 bay raid enclosure equipped with high-speed USB 3.0 Type-B port, thoretical spee up to 5Gbps. Built-in hardware RAID solution, designed to meet the storage needs of home and individual users.
This 3.5-inch RAID enclosure has great flexibility, which is suitable for creative workflows, project archives, system backups, video editing or surveillance systems.
Hardware RAID-RAID 0/1/SPAN
Compatibility
Suitable for all standard 3.5" SATA HDD hard drive. Compatible with Windows, Linux and Mac OS system. No driver needed.
Installation Steps
Step 1: Remove the bottom screw and open the front panel.
Step 2: Take out the trays and put in the hard drive. Fixed with two screws on both sides of the tray separately.
Step 3: Insert the tray, close the front panel, and tighten the bottom screw. Please note the orientation of the two trays.
Step 1. Right click the Computer Management. Select "Manage", find "Disk Management'".
Step 2. Toggle the RAID control switch on the back to the "Normal" position as the picture showed.
Step 3. While Pressing and holding the Set button, press the Power button to turn it on. Press and hold the "Set" button until you can see the New Disk in the "disk management". And then turn off the enclosure.
Step 4. Toggle the RAID control switch to the RAID mode you want, and then hold the "SET" button and turn on the power at the same time. Press and hold the "Set" button until you can see the New Disk in the "disk management". The RAID mode will be set sucessfully.
|
|
|
---|---|---|
Better Heat Dissipation
|
Fix with Screws
|
12V 4A External Power Supply
|