ESP32 Breakout Board WIFI Development Board CP2102 ESP-WROOM-32 Expansion Board

Popular

    Product Introduction

    Development Board
    Introduction:
    ESP32 is already integrated antenna and RF balun, power amplifier, low-noise amplifiers, filters,
    and power management module. The entire solution takes up the least amount of printed circuit board area.
    This board is used with 2.4 GHz dual-mode Wi-Fi and Bluetooth chips by TSMC 40nm low power technology,
    power and RF properties best, which is safe, reliable, and scalable to a variety of applications.
     
    Features:
    High performance-price ratio
    Small volume, easily embeded to other products
    Strong function with support LWIP protocol, Freertos
    Supporting three modes: AP, STA, and AP+STA
    Supporting Lua program, easily to develop
     
    List
    1x ESP32 Development Board
     
     
    Expansion Board
    Features
    The module is safe, reliable and scalable to a variety of applications
    The expansion board has a double-layer design with one pin on both sides
    Good stability and reliability
    The breakout board can expand one GPI0 pin of the ESP-WROOM-32 WIFI development board into two, a good tool for your project
    Nice replacement for breadboard, can expand one GPIO pin of ESP32 development board to two. Perfect for users to reuse all pins in DIY projects
     
    Specification
    PCB material: high quality FR-4 material
    PCB layers: 2 layers
    PCB thickness: 1.6mm
    Product size: 6.8*6.3*1cm
     
    List
    1 x ESP32 Expansion Board
     
     
    Development+Expansion Board
    List
    1x ESP32 Development Board
    1 x ESP32 Expansion Board
    • We accept PayPal only. But we only Accept your Ebay Address,Please Make sure it's 100% right.
    • Payment must be received in 5 business days of auction closing.
    • Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
    • Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
    • We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
    • All package need to wait 30 days(US only need 7-10 days),Please take care it.Less than 30 days,we can't take a refund.
    • If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
    • If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.
    ESP32 Breakout Board WIFI Development Board CP2102 ESP-WROOM-32 Expansion Board

    Product Introduction

    Development Board
    Introduction:
    ESP32 is already integrated antenna and RF balun, power amplifier, low-noise amplifiers, filters,
    and power management module. The entire solution takes up the least amount of printed circuit board area.
    This board is used with 2.4 GHz dual-mode Wi-Fi and Bluetooth chips by TSMC 40nm low power technology,
    power and RF properties best, which is safe, reliable, and scalable to a variety of applications.
     
    Features:
    High performance-price ratio
    Small volume, easily embeded to other products
    Strong function with support LWIP protocol, Freertos
    Supporting three modes: AP, STA, and AP+STA
    Supporting Lua program, easily to develop
     
    List
    1x ESP32 Development Board
     
     
    Expansion Board
    Features
    The module is safe, reliable and scalable to a variety of applications
    The expansion board has a double-layer design with one pin on both sides
    Good stability and reliability
    The breakout board can expand one GPI0 pin of the ESP-WROOM-32 WIFI development board into two, a good tool for your project
    Nice replacement for breadboard, can expand one GPIO pin of ESP32 development board to two. Perfect for users to reuse all pins in DIY projects
     
    Specification
    PCB material: high quality FR-4 material
    PCB layers: 2 layers
    PCB thickness: 1.6mm
    Product size: 6.8*6.3*1cm
     
    List
    1 x ESP32 Expansion Board
     
     
    Development+Expansion Board
    List
    1x ESP32 Development Board
    1 x ESP32 Expansion Board
    • We accept PayPal only. But we only Accept your Ebay Address,Please Make sure it's 100% right.
    • Payment must be received in 5 business days of auction closing.
    • Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
    • Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
    • We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
    • All package need to wait 30 days(US only need 7-10 days),Please take care it.Less than 30 days,we can't take a refund.
    • If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
    • If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.

    DataCaciques