All Systems Including : EWS, ABS System, Engine System, SAS System, TPMS System, IMMO System, Battery System, Oil Service System, SRS Airbag System, DPF System，Air Conditioning System，Gearbox / AT / Transmission System.......... --Rad fault codes: read and decode the DTCs to identify where the fault location is;
--Clear fault codes: erase the DTCs to turn off the MIL after repairs;
--Retrieve ecu information: allows you to retrieve vehicle information;
--Graph live data stream: view the dynamic data stream to determine vehicle condition
--Freeze Frame: it will record the information of the vehicle running status at the moment when the fault occurs to confirm the fault.
--Vehicle information: such as Vehicle Identification Number (VIN), Calibration Mark (CALID) and Calibration Verification Number (CVN) . 
--Online & Offline ECU Coding: generally used for cars after replacing second-hand parts, then it can work . 
--Active Tester( Bi-Directional Control ): to test whether the actuators of each system are normal, for analysis
--Special Function: More than 31+ reset function , like airbag reset, AF Adjustment, DPF reset.........

 

1.ABS Bleeding 
Exhaust the air in Anti-Lock Brake System automatically,easily, fast and precisely..
Anytime the brake system is opened to replace components such as calipers, wheel cylinders, the master cylinder, or brake lines or hoses, air gets inside. The air has to be removed by bleeding the brakes if you want a firm brake pedal. Air trapped in the lines, calipers or wheel cylinders will make the pedal feel soft and spongy. Air is compressible, so when the brakes are applied any air bubbles in the system must first be compressed before the hydraulic fluid will transmit pressure to apply the brakes 
2.EPB Maintenance
Wind back calipers automatically, so you can replace the EPB brake pad and disc very easily, fast and precisely.
EPB maintenance service allows you to perform the service and maintenance of EPB brake systems, including:
Deactivation and activation of the brake control system,
Bleeding brake fluid,
Opening and closing brake pads,
Setting brakes after disc or pad replacement,
on multiple brands of vehicles where electronic brake systems are fitted
3.DPF Regeneration
Diesel Particulate Filter (DPF) Regeneration
DPF Regeneration menu lets you perform the DPF cleaning automatically to clear the blockage through continuous burning of the particulates captured in the DPF filter. When a DPF regeneration cycle is completed. 
4.Injector Coding
Write new injector's actual code or rewrite code in the ECU to the injector code of the corresponding cylinder so as to more accurately control or correct cylinder injection quantity.
After the ECU or injector is replaced, injector code of each cylinder must be confirmed or re-coded so that the cylinder can better identify injectors to accurately control fuel injection.
5.BRT / BMS Reset: Battery Registration / Match / Replacement
New battery must be same type , with same or higher volume than the original battery. 
BRT menu lets you to have new battery validated, clear faults from the dashboard and display current battery details of the vehicle such 
6.SAS Steering Angle Calibration
SAS Calibration menu lets you perform calibration of the Steering Angle Sensor, which permanently stores the current steering wheel position as straight-ahead in the sensor EEPROM. On successful calibration of the sensor, its fault memory is automatically cleared.
7.TPA/TPS: Electronic Throttle Adaptation
Electronic Throttle Body Alignment
It’s very common to see a customer pull into the shop with a Volkswagen or Audi that just will not idle correctly. One of the possible causes is that the throttle position is not known. When the motion range is not known, the ECU simply has no idea where to set the throttle. The ECU must know the full range of motion of the throttle in order for it to properly control the engine.
Using the throttle position sensors in the throttle body, the ECU learns the full open and full closed positions through various states (idle, part throttle, WOT) known as a Throttle Body Alignment (TBA).
8.Oil Reset 
Oil Light Reset menu allows you to reset the interval of service cycle. The Service Indicator System is designed to alert the driver when the vehicle is due for a service. Oil reset methods are determined by the vehicle being tested.
● Oil Reset with One Button
● Manual Reset
● Auto Reset
9.TPMS Reset --Tire Pressure Monitoring System
TPMS Service menu allows you to check the tire sensor IDs from the vehicle ECU and  reset after tires and/or TPMS sensors are replaced and/or tires are replaced. The sensors must be already programmed. Blank sensor won't work. 
This tool can NOT program blank TPMS sensors.
Another tool: Foxwell NT809TS or GT75TS can program new and blank TPMS sensor model: Foxwell T10. 
10.Head Lamp Reset
AFS means Adaptive Front lighting System (at night with the Bi-Xenon headlights) it swivels either side,it will adjust the angle when you turn the steering wheel to make sure you have good visual on the road.
11.Seat Match Coverage
12.Windowsdoor Match
13.Odometer Replace
Note:This tool can NOT do mileage correction. That function needs to use OBDPROG M500.
14.Transmission Adaptation
15.Clutch Adaption
16.Prime Fuel Pump Bleeding
17.Replace Airbag ECU Module
When the vehicle collides and the airbag deploys, the corresponding fault code of the collision data appears, the airbag indicator lights up, and the fault code cannot be cleared. 
Because the data inside the airbag computer is disposable, it is required that All new accessories and the SRS ECU must be replaced.  
If the SRS warning light is on, but the airbags are NOT triggered and there is no collision , you can use this tool to scan to find the problem, after you fix the problem, you can use this tool to erase the code to turn off airbag warning light. It can do most 12V passenger cars that are with OBD2 EOBD protocol.
18.CVT Reset
19. Gear Learn
20.EVAP/SMOG Test
21.TCM OIL Reset
22.Language Change
23.Turbo Adaptation
24.AFR Adaption(Air/Fuel Ratio Adaptation)
25.ODS Initialization
26.OPDS Initializaiton
27.EGR Reset
28.Oxygen Sensor Test
More are coming......