DC 6.5-30V 16 Input & Output RS485 Remote Control Switch PLC IO Expansion Board
Popular
Product Introduction
1: Widely used
2: Maximum load: the maximum load current of each channel is 300MA
3: There are two options with and without guide rails
4: Simple to use and easy to understand
5: Insulation grade: flame retardant VO grade
2: Maximum load: the maximum load current of each channel is 300MA
3: There are two options with and without guide rails
4: Simple to use and easy to understand
5: Insulation grade: flame retardant VO grade
Description:
1: Working voltage: DC 6.5-30V (7.5V 9V 12V 15V 24V)
2: Working current: 8-50MA
3: 16 optically isolated input ports (NPN is active at low level)
4: 16 Darlington output (ULN2803 NPN output)
5: 6 commands of ``open'', ``close'', ``momentary'', ``self-locking'', ``interlocking'', ``delay''
6: 16-channel input can remotely control 16-channel output of another board through RS485 bus (relevant registers need to be set)
7: MODBUS RTU instruction, support 03 06 function code (some registers support 16 function code)
8: Under the "Delay" command, the maximum delay is 255 seconds;
9: MODBUS commands can be entered in the serial port hyper terminal (serial port assistant) OR''Modbus Poll''
10: In MODBUS command mode, up to 64 devices can be connected in parallel
11: The default baud rate is 9600BPS. Baud rate can be selected by jumper: 2400 4800 9600 19200BPS
12: Size: 100 * 72 * 20mm (PCB board only); 120 * 88* 42mm (with DIN rail box)
13: Weight: 64g (PCB board only); 143g (with rail box)
14: Maximum load: the maximum load current of each channel is 300MA
1: Working voltage: DC 6.5-30V (7.5V 9V 12V 15V 24V)
2: Working current: 8-50MA
3: 16 optically isolated input ports (NPN is active at low level)
4: 16 Darlington output (ULN2803 NPN output)
5: 6 commands of ``open'', ``close'', ``momentary'', ``self-locking'', ``interlocking'', ``delay''
6: 16-channel input can remotely control 16-channel output of another board through RS485 bus (relevant registers need to be set)
7: MODBUS RTU instruction, support 03 06 function code (some registers support 16 function code)
8: Under the "Delay" command, the maximum delay is 255 seconds;
9: MODBUS commands can be entered in the serial port hyper terminal (serial port assistant) OR''Modbus Poll''
10: In MODBUS command mode, up to 64 devices can be connected in parallel
11: The default baud rate is 9600BPS. Baud rate can be selected by jumper: 2400 4800 9600 19200BPS
12: Size: 100 * 72 * 20mm (PCB board only); 120 * 88* 42mm (with DIN rail box)
13: Weight: 64g (PCB board only); 143g (with rail box)
14: Maximum load: the maximum load current of each channel is 300MA
DIN rail box parameters:
Product model: UM72
Color: green
Width: suitable for PCB board width UM72 (72mm)
Insulation grade: flame retardant VO grade
Backplane length: suitable for 100 mm PCB board
Net weight: 72g
Installation method: DIN35 and C45 rails
Product model: UM72
Color: green
Width: suitable for PCB board width UM72 (72mm)
Insulation grade: flame retardant VO grade
Backplane length: suitable for 100 mm PCB board
Net weight: 72g
Installation method: DIN35 and C45 rails
application
PLC IO expansion board
Smart home, home automation, smart home;
PTC camera
Security Monitoring
recognition system;
Web video camera
LED light driver
Automatic curtain control
Checklist:
1* DC 12V 24V 16 in 16 out RS485 remote control switch PLC IO expansion board Modbus RTU module
PLC IO expansion board
Smart home, home automation, smart home;
PTC camera
Security Monitoring
recognition system;
Web video camera
LED light driver
Automatic curtain control
Checklist:
1* DC 12V 24V 16 in 16 out RS485 remote control switch PLC IO expansion board Modbus RTU module
- We accept PayPal only. But we only Accept your Ebay Address,Please Make sure it's 100% right.
- Payment must be received in 5 business days of auction closing.
- Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
- Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
- We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
- All package need to wait 30 days(US only need 7-10 days),Please take care it.Less than 30 days,we can't take a refund.
- If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
- If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.
DC 6.5-30V 16 Input & Output RS485 Remote Control Switch PLC IO Expansion Board
Product Introduction
1: Widely used
2: Maximum load: the maximum load current of each channel is 300MA
3: There are two options with and without guide rails
4: Simple to use and easy to understand
5: Insulation grade: flame retardant VO grade
2: Maximum load: the maximum load current of each channel is 300MA
3: There are two options with and without guide rails
4: Simple to use and easy to understand
5: Insulation grade: flame retardant VO grade
Description:
1: Working voltage: DC 6.5-30V (7.5V 9V 12V 15V 24V)
2: Working current: 8-50MA
3: 16 optically isolated input ports (NPN is active at low level)
4: 16 Darlington output (ULN2803 NPN output)
5: 6 commands of ``open'', ``close'', ``momentary'', ``self-locking'', ``interlocking'', ``delay''
6: 16-channel input can remotely control 16-channel output of another board through RS485 bus (relevant registers need to be set)
7: MODBUS RTU instruction, support 03 06 function code (some registers support 16 function code)
8: Under the "Delay" command, the maximum delay is 255 seconds;
9: MODBUS commands can be entered in the serial port hyper terminal (serial port assistant) OR''Modbus Poll''
10: In MODBUS command mode, up to 64 devices can be connected in parallel
11: The default baud rate is 9600BPS. Baud rate can be selected by jumper: 2400 4800 9600 19200BPS
12: Size: 100 * 72 * 20mm (PCB board only); 120 * 88* 42mm (with DIN rail box)
13: Weight: 64g (PCB board only); 143g (with rail box)
14: Maximum load: the maximum load current of each channel is 300MA
1: Working voltage: DC 6.5-30V (7.5V 9V 12V 15V 24V)
2: Working current: 8-50MA
3: 16 optically isolated input ports (NPN is active at low level)
4: 16 Darlington output (ULN2803 NPN output)
5: 6 commands of ``open'', ``close'', ``momentary'', ``self-locking'', ``interlocking'', ``delay''
6: 16-channel input can remotely control 16-channel output of another board through RS485 bus (relevant registers need to be set)
7: MODBUS RTU instruction, support 03 06 function code (some registers support 16 function code)
8: Under the "Delay" command, the maximum delay is 255 seconds;
9: MODBUS commands can be entered in the serial port hyper terminal (serial port assistant) OR''Modbus Poll''
10: In MODBUS command mode, up to 64 devices can be connected in parallel
11: The default baud rate is 9600BPS. Baud rate can be selected by jumper: 2400 4800 9600 19200BPS
12: Size: 100 * 72 * 20mm (PCB board only); 120 * 88* 42mm (with DIN rail box)
13: Weight: 64g (PCB board only); 143g (with rail box)
14: Maximum load: the maximum load current of each channel is 300MA
DIN rail box parameters:
Product model: UM72
Color: green
Width: suitable for PCB board width UM72 (72mm)
Insulation grade: flame retardant VO grade
Backplane length: suitable for 100 mm PCB board
Net weight: 72g
Installation method: DIN35 and C45 rails
Product model: UM72
Color: green
Width: suitable for PCB board width UM72 (72mm)
Insulation grade: flame retardant VO grade
Backplane length: suitable for 100 mm PCB board
Net weight: 72g
Installation method: DIN35 and C45 rails
application
PLC IO expansion board
Smart home, home automation, smart home;
PTC camera
Security Monitoring
recognition system;
Web video camera
LED light driver
Automatic curtain control
Checklist:
1* DC 12V 24V 16 in 16 out RS485 remote control switch PLC IO expansion board Modbus RTU module
PLC IO expansion board
Smart home, home automation, smart home;
PTC camera
Security Monitoring
recognition system;
Web video camera
LED light driver
Automatic curtain control
Checklist:
1* DC 12V 24V 16 in 16 out RS485 remote control switch PLC IO expansion board Modbus RTU module
- We accept PayPal only. But we only Accept your Ebay Address,Please Make sure it's 100% right.
- Payment must be received in 5 business days of auction closing.
- Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
- Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
- We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
- All package need to wait 30 days(US only need 7-10 days),Please take care it.Less than 30 days,we can't take a refund.
- If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
- If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.