Introducing the Super Capacitor Emergency Jump Starter, a revolutionary device designed to provide a quick and reliable solution for starting your vehicle in emergency situations. Unlike traditional jump starters, this product doesn't come with a built-in battery, eliminating the need for pre-charging. Instead, the capacitors inside the jump starter draw power directly from your vehicle's weak battery, allowing you to use it straight away. Whether you're stuck in a parking lot or stranded on a deserted road, this jump starter will give you the peace of mind you need.
Key points about the Super Capacitor Emergency Jump Starter:
Please note that this product is specifically designed for jumpstarting vehicles and is not intended for recharging your vehicle's battery. With its innovative features and reliable performance, the Super Capacitor Emergency Jump Starter is a must-have accessory for every car owner, ensuring you can get back on the road with ease and confidence.
Powering USB devices: The USB port on the unit can be used to power or charge USB devices such as smartphones, tablets, and USB LED lights. Simply connect your device to the unit 's charge port and press power button.
Operating Instructions
Turning On/Off
To turn on the unit, simply press the power button. The green and the light will turn on. If no emergency jumpstart has been performed, the unit will automatically shut off after 30 seconds of inactivity.
Performing an Emergency Jumpstart:
To perform an emergency jump start, please follow the instructions below:
1: Attach the unit’s red clamp to the positive terminal off your 12V battery, followed by the unit’s black clamp to the negative terminal of your 12V battery.
2: When connection has been made, the capacitors inside the unit will draw power from your vehicle's battery. Once jump starter reaches full charge, the unit will show “15V 100%”. This means the unit is ready to perform an emergency jump start.
3: Once full charge has been achieved, press the power switch to begin the ignition countdown of 6 seconds. When the six seconds timer reaches its completion, a beep will sound so that you can start up your vehicle’s engine.
4: Once your vehicle's engine has started, wait for the unit to fully charge (15V 100%) then disconnect the unit from your battery.
If the vehicle does not start, please allow for 10 seconds for the jump starter to fully discharge. Once the capacitors have fully discharged, the capacitors inside the jump starter will begin to recharge via the battery connection. Once fully charged, repeat step three and four from above.
However, if the vehicle feels us to start, there might be a fault with the battery and it will need to be replaced.
Charging instructions (Optional)
While this unit can draw power from your vehicle's battery, should you wish to top up the charge of the capacitors inside the unit, you can use the provided USB type C cable to charge the device.
Alarm Fault Codes
Technical Specification: