Product features:
1.Brand:Easyinsmile
2.Excellent precision.
3.High dimensional stability.
4.High tear strength and tensile strength.
5.Easy mixing.
6.Packaging: light body 2*50ml + putty 2*400g (400g base + 400g catalyst).
7.Types:Light body & putty
Product introduce:
1.Definition
A-silicone Impression Material(Putty&Light Body) is silicone-based impression materials for using in dentistry.
2.Indication
Crown and bridge impressions,inlay and onlay impressions.
3.Composition
Polyvinyl siloxane,hydrogen polysiloxanes,silica,platinum catalyst,pigments,menthe flavor,filler.
4.Impression tray
Choose
the rigid stock or individual tray for your patient.To get better
adhesion to metal or plastic trays,a tray adhesive is allowed.
5.Technical Date
|
Putty
|
Light Body
|
Mixing time
|
0:30Min
|
/
|
Total working time
|
≤1:30Min
|
≤1:30Min
|
Oral setting time
|
≥3:30Min
|
≥3:30Min
|
Elastic recovery
|
≥99%
|
≥99%
|
Strain-in-compression
|
2%-8%
|
2%-8%
|
Linear dimensional change(after 24 h)
|
≤0.5%
|
≤0.4%
|
Detail reproduction
|
75um
|
20um
|
Times refer to normal room temperature(72℉/23℃ and a normal relative humidity of air(50%).
6.Mixing of the materials
Mix
equal parts in volume of base paste and catalyst paste at room
temperature.Take the base paste with the blue spoon and the catalyst
paste with the white spoon.Knead the components quickly with the
fingertips for at least 30 seconds until the colour is homogeneous.
Close jars immediately after use.
Don't interchange caps of jars.
7.Disinfection
The
impression material must be disinfected immediately after take from the
mouth.Recommend is theuse of a 2%glutaraldehyde solution.Please ensure
that the used disinfectant is indicated for the use with addition curing
silicone impression material.After removal from the mouth,clean
impression under the running water.Leave the impression in the
disinfecting solution for about 10 to 15 minutes.Finally rinse off the
disinfection solution under the running water again.
After
30 minutes,die stone models may be poured at the earliest.We recommend
using special die stone models(ISO 6873,Type 3 or Type 4).
8.Storage
Store
and use in dry location at room temperature not exceeding 78F/25C.The
impression is stable and can be poured.even after months without loss of
accuracy.We recommend not storing material in the frigerator or in the
freezer.
9.Please Note
•Close jars immediately after use paste.Don't interchange caps of jars.
•Don't
wear.iatex gloves when mixing and kneading the material.If you had
contact with latex gloves before mixing,wash your hands thoroughly.The
use of PVC or.PE gloves is recommended.
•Before the first time.use of light body.,need to make the material extrusion amount,until the
two-component mixing head at the same time by extrusion.
•Allergic caution in,the use of A silicon impression material
•Keep out of the .children.For dental use.only.
•Higher temperatures shorten,lower temperatures increase working time.
•Never
allow the impression to come into contact with organic solutions or
liquids containing same as thismay result in swelling of the material
and therefore may lead to inaccuracies.
•Ordinarily Technique and One step Technique is either-or method.
•Don't use together with condensation curing or polyether type impression materials.
•Don't use after expiration date.
10.Packing
Putty: 2 jars 400g paste (400g Base & 400g Catalyst)
light body: 2 tubes 50ml paste