Dental Impression Silicone Material Putty Heavy Body /Light Body Easyinsmile

DESCRIPTION

Product features:
1.Brand:Easyinsmile
2.Excellent precision.
3.High dimensional stability.
4.High tear strength and tensile strength.
5.Easy mixing.
6.Packaging: light body 2*50ml + putty 2*400g (400g base + 400g catalyst).
7.Types:Light body & putty

Product introduce:

1.Definition
A-silicone Impression Material(Putty&Light Body) is silicone-based impression materials for using in dentistry.

2.Indication

Crown and bridge impressions,inlay and onlay impressions.

3.Composition

Polyvinyl siloxane,hydrogen polysiloxanes,silica,platinum catalyst,pigments,menthe flavor,filler.

4.Impression tray

Choose the rigid stock or individual tray for your patient.To get better adhesion to metal or plastic trays,a tray adhesive is allowed.

5.Technical Date

	Putty	Light Body
Mixing time	0:30Min	/
Total working time	≤1:30Min	≤1:30Min
Oral setting time	≥3:30Min	≥3:30Min
Elastic recovery	≥99%	≥99%
Strain-in-compression	2%-8%	2%-8%
Linear dimensional change(after 24 h)	≤0.5%	≤0.4%
Detail reproduction	75um	20um

Times refer to normal room temperature(72℉/23℃ and a normal relative humidity of air(50%).

6.Mixing of the materials

Mix equal parts in volume of base paste and catalyst paste at room temperature.Take the base paste with the blue spoon and the catalyst paste with the white spoon.Knead the components quickly with the fingertips for at least 30 seconds until the colour is homogeneous. Close jars immediately after use.
Don't interchange caps of jars.

7.Disinfection

The impression material must be disinfected immediately after take from the mouth.Recommend is theuse of a 2%glutaraldehyde solution.Please ensure that the used disinfectant is indicated for the use with addition curing silicone impression material.After removal from the mouth,clean impression under the running water.Leave the impression in the disinfecting solution for about 10 to 15 minutes.Finally rinse off the disinfection solution under the running water again.
After 30 minutes,die stone models may be poured at the earliest.We recommend using special die stone models(ISO 6873,Type 3 or Type 4).

8.Storage

Store and use in dry location at room temperature not exceeding 78F/25C.The impression is stable and can be poured.even after months without loss of accuracy.We recommend not storing material in the frigerator or in the freezer.

9.Please Note
•Close jars immediately after use paste.Don't interchange caps of jars.
•Don't wear.iatex gloves when mixing and kneading the material.If you had contact with latex gloves before mixing,wash your hands thoroughly.The use of PVC or.PE gloves is recommended.
•Before the first time.use of light body.,need to make the material extrusion amount,until the
two-component mixing head at the same time by extrusion.
•Allergic caution in,the use of A silicon impression material
•Keep out of the .children.For dental use.only.
•Higher temperatures shorten,lower temperatures increase working time.
•Never allow the impression to come into contact with organic solutions or liquids containing same as thismay result in swelling of the material and therefore may lead to inaccuracies.
•Ordinarily Technique and One step Technique is either-or method.
•Don't use together with condensation curing or polyether type impression materials.

•Don't use after expiration date.

10.Packing
Putty: 2 jars 400g paste (400g Base & 400g Catalyst)
light body: 2 tubes 50ml paste

FDA Feedback Returns About us Contact us

FDA

The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so, do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item.

USA CHIEF OFFICE:EASYINSMILE(USA)INTERNATIONAL CORP.
CHINA FACTORY:CHANGSHA EASYINSMILE MEDICAL INSTRUMENT CO LTD
Room A501, A502, A504, Jinqiyuan Incubation Mansion, No. 229
410000 Changsha
China
Phone:0086-18373188632

Feedback

Your feedback is VERY important to us

Please leave us positive feedback, an positive feedback will be automatically left for you once we receive your full payment.

Please leave us with any concerns prior to leave negative feedback, as we can only correct issues when we are aware of them.

We understand the concerns and frustrations you might have, and will try our best to resolve the isuues.

We will try our best to give you the best service and purchase experience.

Returns

If the item you received is damaged or defective,Please send message immidately.We will free exchange or refund.

You can return your purchase for up to 15 days from the date of delivery. No refund will be issued if the product shows signs of use. Returned package must be in the original packaging, everything must be in new condition, No missing parts.

Our guarantee does not cover accidental damage or wear of product caused by customer.Thank you very much for your understanding!

About us

Easyinsmile(USA)International Corp. is a professional Large-scale Manufacturer of all types of dental instruments and related products,integrating development and production.Our company regards"Reasonable prices,efficient production time and good after sale service" as our tenet.We hope to cooperate with more customers for mutual development and benefits.We welcome potential buyers to contact us.

Contact us

If you send message immediately after placing the order, we will make every effort to assist you with your change request. Unfortunately, we can not make changes or cancel an order once it has shipped.

We offer the best items at the best prices. We strive to exceed all your expectations and put a smile on your face.

Your experience will be a pleasant and effortless one. We stand behind our products and pride ourselves on OUTSTANDING customer service. We guarantee that you will be delighted with your purchase or we will gladly and promptly issue you a refund or make things right!