LED LCD Constant Current Boost Board 55-255V output For 22-60" TV backlight
Popular
Product Introduction
Features:
1: Wide range of applications
2: Reliable quality
3: stable performance
4: Simple to use
5: Small size
1: Wide range of applications
2: Reliable quality
3: stable performance
4: Simple to use
5: Small size
Parameter:
Output voltage: 55-255V automatic constant current
About input voltage: This constant current board requires 2 voltage inputs
VCC is connected to 40-165V voltage, VIN is connected to 12-24V voltage, only one voltage will not be boosted.
Suitable for three-in-one retrofit board, the output is higher than the input
Current Adjustment Guidelines
J1=20MA J2=40MA J3=60MA J4=J5=100MA J6=200MA
The default output is 200MA, and the corresponding current value can be increased by short-circuiting the solder joints (on the basis of 200mA). Be careful not to increase the excessive current at once to avoid burning out the light bar.
Output voltage: 55-255V automatic constant current
About input voltage: This constant current board requires 2 voltage inputs
VCC is connected to 40-165V voltage, VIN is connected to 12-24V voltage, only one voltage will not be boosted.
Suitable for three-in-one retrofit board, the output is higher than the input
Current Adjustment Guidelines
J1=20MA J2=40MA J3=60MA J4=J5=100MA J6=200MA
The default output is 200MA, and the corresponding current value can be increased by short-circuiting the solder joints (on the basis of 200mA). Be careful not to increase the excessive current at once to avoid burning out the light bar.
Package list:
1*22-60 inch LED LCD TV backlight constant current booster board
1*22-60 inch LED LCD TV backlight constant current booster board
- We accept PayPal only. But we only Accept your Ebay Address,Please Make sure it's 100% right.
- Payment must be received in 5 business days of auction closing.
- Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
- Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
- We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
- All package need to wait 30 days(US only need 7-10 days),Please take care it.Less than 30 days,we can't take a refund.
- If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
- If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.
LED LCD Constant Current Boost Board 55-255V output For 22-60" TV backlight
Product Introduction
Features:
1: Wide range of applications
2: Reliable quality
3: stable performance
4: Simple to use
5: Small size
1: Wide range of applications
2: Reliable quality
3: stable performance
4: Simple to use
5: Small size
Parameter:
Output voltage: 55-255V automatic constant current
About input voltage: This constant current board requires 2 voltage inputs
VCC is connected to 40-165V voltage, VIN is connected to 12-24V voltage, only one voltage will not be boosted.
Suitable for three-in-one retrofit board, the output is higher than the input
Current Adjustment Guidelines
J1=20MA J2=40MA J3=60MA J4=J5=100MA J6=200MA
The default output is 200MA, and the corresponding current value can be increased by short-circuiting the solder joints (on the basis of 200mA). Be careful not to increase the excessive current at once to avoid burning out the light bar.
Output voltage: 55-255V automatic constant current
About input voltage: This constant current board requires 2 voltage inputs
VCC is connected to 40-165V voltage, VIN is connected to 12-24V voltage, only one voltage will not be boosted.
Suitable for three-in-one retrofit board, the output is higher than the input
Current Adjustment Guidelines
J1=20MA J2=40MA J3=60MA J4=J5=100MA J6=200MA
The default output is 200MA, and the corresponding current value can be increased by short-circuiting the solder joints (on the basis of 200mA). Be careful not to increase the excessive current at once to avoid burning out the light bar.
Package list:
1*22-60 inch LED LCD TV backlight constant current booster board
1*22-60 inch LED LCD TV backlight constant current booster board
- We accept PayPal only. But we only Accept your Ebay Address,Please Make sure it's 100% right.
- Payment must be received in 5 business days of auction closing.
- Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
- Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
- We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
- All package need to wait 30 days(US only need 7-10 days),Please take care it.Less than 30 days,we can't take a refund.
- If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
- If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.