This fixed price listing is for 2 x 280ml (10oz) Bottles of Vacuum Pump Oil as shown.
Oil should be changed often to ensure proper pump performance. Use only quality oil specifically designed for use in Deep Vacuum Pumps.
Draining Oil Instructions:
1. Drain oil when pump is warm
2. Place pump on a level surface.
3. Place drain pan under drain valve.
4. Open drain valve and oil fill valve.
5. Let as much oil drain as possible to remove any traces of acid.
6. Flush by pouring a small amount of fresh oil through oil fill port.
7. CLOSE DRAIN VALVE.
8. Pour oil into fill port until level is even with mark on sight glass.
9. Re-install oil fill cap.
10. Cap all intake ports and run pump for two minutes.
11. Stop pump and check to see that oil is at the proper level on sight glass.
Please visit our ebay shop to see our huge range of catering parts.
All of our parts are sent out same day from our own warehouse stock. If you have any questions please do not hesitate to contact us.
We do advise that any parts are diagnosed, installed and tested by a suitably qualified engineer.
