Application- Turbocharger Compatible For
Turbo Charger Part No –
OEM Part No –
Engine Specification – 2.2L ENGINE
After Market Brand- Suotepower
TURBOCHARGER INSTALLATION AND STARTING PROCEDURE ,
1) Use only the correct part number i.e. TC
approved by the engine manufacturer.
2) Check air cleaner, filter elements and its
connecting pipes, hoses to the TC are free from foreign material. Air filter elements
should be cleaned / replaced as recommended by the engine manufacturer.
3) Clean the inlet &Exhaust Lines leading
from & to the Turbo.
4) Replace the engine oil and oil filter, if
necessary (adhere to engine manufacturers recommendation for correct grade and
change periodicity.
5)Clean the intercooler
6)Clean the EGR Valve
7)Ensure that there is no back compression in the engine ,
DO NOT ACCELERATE THE ENGINE IMMEDIATELY
AFTER START ,
Accelerating the engine immediately after
start can make the TC to operate at very high speeds with inadequate
lubrication which will lead to reduce TC service life.
Engine should not be put under full load
immediately after start, it should run at idling speed for a minimum time (5-10
Minutes) ,
If you have any questions or doubts kindly share
it BELOW THE PRODUCT DETAILS.
KUBER TURBO TECH will contact
you within 12 hours.
Happy to assist and at your service!
Note 1 : Please check the
Turbocharger part number / OEM part number / from your old part no to be
100% sure if this is the right one for your Vehicle . Same Vehicle Model in many cases can have
several options & Application.
Note 2 : If your vehicle part number matched
with our any compatible Turbocharger & OEM part number , This is the 100 %
fit and suitable for your turbocharger .